Advertisement
2.
INTRODUCTION
Composite housing with trigger feed. GS/TUV approved. Fitted with 1.5mtr of cable with BS approved 3 pin 230V non-rewirable fused plug.
Includes three glue sticks.
3.
OPERATION
3.1
PREPARATION
3.1.1 Ensure the work surface is clean and clear before engaging in the task in hand.
3.1.2 Steady the workpiece with an appropriate vice or clamp.
3.1.3 Insert the glue stick firmly into the inlet and plug the glue gun into the mains.
3.2
USING THE GLUE GUN
3.2.1 Squeeze the trigger several times to set the stick into the gun.
3.2.2 Leave the gun to warm up for approxiamateley 5 minutes.
3.2.3 Squeeze the trigger firmly until glue flows from the nozzle.
3.2.4 When the task is complete, unplug the gun and leave to cool.
3.2.5 No cleaning is required. DO NOT attempt to remove the glue stick from the gun as this may cause damage to the product and/or
personal injury.
4.
ENVIRONMENTAL INFORMATION
4.1
CHEMICAL COMPOSITION
4.1.1 Material:
4.2
TECHNICAL SPECIFICATIONS
4.2.1 Softening Point:
4.2.2 Solidify Time:
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts
without prior notice. IMPORTANT: No liability is accepted for incorrect use of this equipment. WARRANTY: Guarantee is 12 months from
purchase date, proof of which will be required for any claim. INFORMATION: For a copy of our latest catalogue and promotions call us on
01284 757525 and leave your full name and address, including postcode.
Declaration of Conformity
ELECTRIC GLUE GUN
Model: AK292
89/336/EEC EMC Directive
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
01284 757500
EVA (70%), Resin (30%)
> = 82°C
4-10 seconds
We, the sole importer into the UK, declare that the product listed here is in conformity with the following standards and directives.
The construction file for this product is held by the Manufacturer and may be inspected, by a
national authority, upon request to Jack Sealey Ltd.
Signed by Mark Sweetman
Sole UK Distributor, Sealey Group, Bury St. Edmunds, Suffolk.
01284 703534
3rd March 2005
www.sealey.co.uk
Web
For Jack Sealey Ltd.
Sole importer into the UK
of Sealey Professional Tools.
sales@sealey.co.uk
email
AK292 - 2 - 070305
Advertisement
