Update Software - Superchips Pulsar LT User Manual

Update Software

Downloading Update Agent 1.0
The Update Agent may be used to update the device via the USB connection.
The software can be downloaded through the internet. This process currently
can only be done on a Windows computer, Mac devices are not supported.
NOTE: It is recommended to install Update Agent 1.0 on a laptop computer for
best accessibility (you will need to connect the computer to the vehicle's OBDII
port to perform updates).
STEP 1 - Go to a computer with internet access, and go to one of the following
websites: superchips.com - diablosport.com - edgeproducts.com
STEP 2 - Go to the website's Updates/Downloads tab and click the link
"Download Update Agent 1.0" and save the .exe file to a findable location on the
computer.
STEP 3 - Run the .exe installation program that you downloaded, and read
through the license terms and conditions, check the agreement box and click
Install. Continue through installation until it says Installation Successfully
Completed. Click Close to finish the process.
NOTE: If given a Security Warning pop-up upon install, click run to proceed.
Also, if asked, install Holley USBCAN Driver as well as Update Agent 1.0. This
driver is required to connect to the device.
5