Using Your Device....6 Diagnostics......6 Identify Vehicle....6 Vehicle Functions....7 Tuner Info & Settings..12 Jeep is a registered trademark of Chrysler LLC. Superchips, Inc. is not affiliated with Chrysler LLC. Jeep® Wrangler CONTENTS Before you begin....2 What’s In the Box....2 Navigating the Menus..2 Dear Auto Enthusiast..3...
Before You Begin Navigating the Menus What’s in the box Familiarize yourself with the menu structure below: 1. The Flashcal Device with attached OBD-II cable (not shown) Main Menu Diagnostics (Read & Clear DTCs) Identify Vehicle (Display critical vehicle information) Vehicle Functions (Quickly modify vehicle settings) Tuner Info &...
“doing it the right way” approach to WOW each and every one of our custom- ers. Superchips is simply the best-selling brand in the business. All of our products are easy to use, flexible, and easy to update when you want to.
Flashcal to a Flashpaq. After purchasing and downloading this option, you will have the ability to use your device as a Flashpaq product. This allows you to program your vehicle with the latest tunes available from Superchips. For more information go to www.superchips.com) Getting Started Step 1 - Update Your Device NOTE: You will need to be connected to the internet and running Windows XP or later.
Do not remove the programming cable during any programming sequence. If you do, the vehicle may not start. A Superchips programmer is designed to automatically go into Vehicle Recovery Mode and if this occurs, it will return your vehicle to factory stock.
Using Your Device Diagnostics A Diagnostic Trouble Code (DTC) arises when a vehicle’s computer detects a sensor failure or a parameter outside a specific range. In the case of a detected failure, most vehicles will illuminate the check engine light alerting you of a failure: The Flashcal allows you view these codes, and gives you the option to clear them.
Vehicle Functions Tire Size Measure from Based on the year and model of your Jeep, you may have the option ground to the top of your tire. Place a ruler to modify various features using the Flashcal device. This section or flat level item on provides a brief explanation on what these functions are, and how the top of your tire to...
Page 8
Using Your Device Cont’d Vehicle Functions Cont’d • Transfer Case High (T.Case Hi) - is used to improve your Jeep’s 4 Hi shift points by modifying the transfer case gear ratio. To adjust the Transfer Case High Gear Ratios: 1. Choose an option from the Vehicle Functions Menu. 2.
Page 9
To adjust the Once Touch Lane Change, Lamp Flash, or Horn Chirp settings: 1. Choose an option from the Vehicle Functions Menu. 2. Use the up/down buttons to highlight either OFF or ON. 3. Press OK. • Head Lamp Delay (Lamp Delay) - gives you the ability to adjust the time it takes for the head lamps to turn off after the engine has been turned off.
Page 10
Using Your Device Cont’d Vehicle Functions Cont’d • Daytime Running Lights (Run Lights) - allows you to adjust the daytime running light settings for 2007-13 vehicles (if the vehicle is equipped with this feature). The running lights are activated while the engine is running, and the transmission is in “drive”. There are six available settings: •High Beams •European...
Page 11
Vehicle Functions Cont’d • Axle Lock Enable (2007-14 Rubicon Only) - allows you to lock the front OR rear axle. This feature can be used while the transfer case is in 4-Hi or 4-Lo. CAUTION: Do not exceed 30 MPH while using this function. CAUTION: Do not press the Axle Lock button on the center console while using this function.
•Obey all traffic and other laws. •Do not exceed proper operating conditions. •Do not stack Superchips tuning with another tuning product. Doing so may result in damage to your vehicle or unpredictable powertrain results. •Only adjust or remove the tire pressure monitoring system during off-road use.
Need help?
Do you have a question about the 3570 Flashcal Jeep Wrangler and is the answer not in the manual?
Questions and answers