General Notes Regarding Property Damages And Product Damages - Bosch Rexroth Hagglunds DUc MS2 Installation & Maintenance Manual

General notes regarding property damages and product damages | Hägglunds DUc Drive unit
3 General notes regarding property
Danger from improper handling
Product can be damaged.
▶ Do not expose the product to an impermissible mechanical load.
▶ Never use the product as a handle or step.
▶ Do not place/lay any objects on the product.
▶ Do not strike the Hägglunds Drive Unit or any part of it or its accessories.
▶ Do not strike fittings (e.g. sensors or valves).
▶ Do not strike sealing surfaces (e.g. service line ports).
▶ Leave the protective covers on the Hägglunds Drive Unit until shortly before
▶ Do not perform electro-welding on the Hägglunds Drive Unit.
Damage to equipment due to improper lubrication
Product can be damaged or destroyed.
▶ Never operate the Hägglunds Drive Unit with insufficient hydraulic fluid.
▶ When commissioning a machine/system, make sure that the case interior and
Mixing of hydraulic fluids
Product can be damaged.
▶ Before installation, remove all fluids from the Hägglunds motor to prevent
▶ Any mixing of hydraulic fluids of different manufacturers or different types of
Wrong voltage
Electrical motor damage.
▶ All electrical supply levels shall be within the limits that the equipment is
damages and product damages
the lines are connected.
the service lines of the Hägglunds motor are filled with hydraulic fluid and
remain filled during operation.
mixing with the hydraulic fluid used in the machine/system.
the same manufacturer is not permissible in general.
constructed for, see order specific Hägglunds DUc documentation and product
identification.
NOTICE
RE 15326-WA, Version 06.2020, Bosch Rexroth AB
13/88