Related Manuals for Enerpac XA-Series
Summary of Contents for Enerpac XA-Series
- Page 1 XA-Series Air Driven Hydraulic Pumps Instruction manual XA11G XA12G XA12 XA11 XA11V MODEL NUMBER XA12V SERIAL NUMBER...
-
Page 2: Table Of Contents
If oil is injected under the skin, see a doctor immediately. system operation. Troubleshooting Enerpac cannot be responsible for damage or injury resulting from unsafe product use, lack of maintenance or incorrect product and/or system operation. Contact Enerpac when in doubt as to the safety precautions and operations. - Page 3 Immediately replace worn or damaged parts by genuine ENERPAC Avoid damaging hydraulic hose. parts. Non genuine Enerpac parts may break causing personal injury Avoid sharp bends and kinks when routing hydraulic hoses. and property damage. ENERPAC parts are designed to fit properly Using a bent or kinked hose will cause severe back-pressure.
-
Page 4: Installation
Installation AIR IN OIL OUT 2,1-8,6 bar • 30-125 psi • 0,21-0,86 MPa 0-700 bar • 0-10.000 psi • 0-70 MPa 88 -102 Nm 5/16” /minute 65 -75 FT LBS Mobil Almo 525 Shell Torcula 32 Xxxxx XA-V ATEX 88 -102 Nm /minute 65 -75 FT LBS Mobil Almo 525... -
Page 5: Mounting
Mounting 292 mm (11.50") 309 mm (12.15") Register your pump online: L max. = h + 20 mm (.79”) www.xvari.com M5 selftapping www.enerpac.com #10-16 UN selftapping... -
Page 7: Operation
Operation XVARI Technology enables users to continuously and precisely control the amount of hydraulic oil flow in advance and retract ® mode and thereby the speed of the hydraulic cylinder or tool that the pump is powering. Specifically for jobs that require accurate load positioning, aligning and lowering, XVARI Technology enables the user to better control the hydraulic application. -
Page 8: Release Locking
Release locking XA / XA-V... -
Page 9: Valve Operation
Valve operation XA-V... -
Page 10: Disconnecting
Disconnecting... -
Page 11: Maintenance
Maintenance 8 mm 8 mm... -
Page 12: Maximum Pressure Setting
Maximum pressure setting Standard Adjusted 7/32”... -
Page 13: Technical Specifications
Technical specifications Used with cylinder Usable oil capacity Model Number Pressure Gauge 3-way 3-pos. Valve 4-way 3-pos. Valve Weight Model number Litres in³ XA11 19.0 XA11 Single acting XA12 10,2 22.4 XA12 XA11G 19.4 XA11G Single acting XA12G 10,4 22.9 XA12G XA11V 10,1... -
Page 14: Troubleshooting
Increase air pressure The air line is blocked Unblock air hose The air line leaks Fix air leak Air motor malfunction Contact Enerpac service center Object stuck under ‘’Pressure’’ pedal Clear pedal from foreign objects Low oil level Replenish oil Prolonged storage... - Page 15 Dirty air filter Clean air filter in RFL Reservoir bladder malfunction Contact Enerpac service center Please contact Enerpac if the DVD is not included, or visit www.enerpac.com for a download of the manual. Moisture under pump Condensed water from exhaust air...
- Page 16 28814 Daganzo de Arriba Japan (Madrid) Spain +81 48 662 4911 +34 91 884 86 06 e-mail: info@enerpac.com +81 48 662 4955 +34 91 884 86 11 Internet: www.enerpac.com sales-jp@enerpac.com sales-es@enerpac.com Enerpac © 2012 - Subjects to change without notice.
Need help?
Do you have a question about the XA-Series and is the answer not in the manual?
Questions and answers