Sealey SPB80T.V2 Quick Start Manual page 4

step 9: Attach the support rods to the hopper using the hex bolts M6x20, big flat washers Ø6 and nylon lock nuts M6. Adjust sliding plate to
closed position.
step9
step 10: Insert the hopper screen into the bottom of the hopper.
step10
5.1.
5.2.
step 11: Connect hitch bracket to hitch tongue using drive pin Ø9x60. Hitch tongue is length adjustable, refer to fig.12.
step11
Original Language Version
© Jack Sealey Limited SPB80T.V2 | Issue:1 11/11/19