NHM-2/5nx,ny/6/9
Troubleshooting
9&2 PHDVXUHPHQW SRLQWV XEB XEB
VCOS - R202
*HQHUDO LQVWUXFWLRQV IRU 6\QWKHVL]HU WURXEOHVKRRWLQJ
Start WinTesla-Service-Software and
Select:
Product
Band
Select:
Testing
RF Controls
Measure the output of the VCO (G500) at T502 with spectrum analyzer and 500 ohm passive probe;
the power should be around –20 dBm.
0+] UHIHUHQFH RVFLOODWRU 9&7&;2
The 26 MHz oscillator (G502) is used as a reference frequency for the PLL synthesizer and as the sys-
tem clock for BB ( 13 MHz) after it is divided by 2 in HAGAR. 26 MHz signal from the VCTCXO is
approx. 0,8 Vpp. Frequency of this oscillator is adjusted by dc voltage ( Vcon ) coming from the DAC in
3DJH
EGSM
RX Continuous
Cont. Mode Ch: 60
1RNLD &RUSRUDWLRQ
PAMS Technical Documentation
Alt+p
b
e
Alt+e
r
Alt+r
Alt+o, 60
T502
unbalanced
,VVXH $SULO