Replacing The Pioneer Drive With The Maxoptix Drive; System Shutdown; Removing The Scsi Tray; Illustration 2-1-A - GE MaxOptix T5-2600P Star Series Installation Manual

Direction 2233080, Rev 3
SECTION 1 - REPLACING THE PIONEER DRIVE
2 2 2
Electrostatic Discharge (ESD) can damage electronic circuits. Do not handle any
components without following the proper ESD precautions.
2-1

SYSTEM SHUTDOWN

The system software must be shut down (i.e. UNIX is down) and the hardware must be powered down.
1. Starting at the application level, press the UTILITIES button on the plasma display.
2. Press the numbers, 1 2 3, in numerical order.
3. Press the SHUTDOWN button on the plasma display. A pop-up message appears on the screen asking:
Really shut the scanner down?
Press the YES button to shut down the scanner. Wait until you get to the prompt monitor level, i.e. ">"
4. Turn off the Genesis computer and then unplug the computer from the Genesis console.
5. Remove the front cover from the Genesis computer.
The SCSI disk, tape or cartridge drives are contained in the SCSI tray, which is accessible from the front of the
cabinet. To remove a disk, tape or cartridge drive, first remove the SCSI tray from the cabinet.
SCSI
TERMINATOR
INTERFACE
WITH THE MAXOPTIX DRIVE
LOOSEN THESE
2 SCREWS
SCSI
CABLE

SCSI Tray Power Connector

ILLUSTRATION 2-1-A

High Capacity MOD Option Installation Manual
NOTICE
6
SCSI TRAY
POWER
CONNECTOR