User Management; Add Administrator - HIKVISION DS-K1TA70MI-T User Manual

• Output: A face recognition terminal can connect an external access controller. And the two
devices will transmit the card No. via Wiegand 26 or Wiegand 34.
• Input: A face recognition terminal can connect a Wiegand card reader.
5. Tap to save the network parameters.
Note
If you change the external device, and after you save the device parameters, the device will
reboot automatically.

6.4 User Management

On the user management interface, you can add, edit, delete and search the user.

6.4.1 Add Administrator

The administrator can login the device backend and configure the device parameters.
Steps
1. Long tap on the initial page and log in the backend.
2. Tap User → + to enter the Add User page.
3. Edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combination of lower
letters, upper letters, and numbers.
• The employee ID should not be duplicated.
4. Tap the Name field and input the user name on the soft keyboard.
Note
• Numbers, upper case letters, lower case letters, and special characters are allowed in the user
name.
• Up to 32 characters are allowed in the user name.
5. Optional: Add a face picture, cards, or password for the administrator.
Note
• For details about adding a face picture, see Add Face Picture .
• For details about adding a card, see Add Card .
• For details about adding a password, see Add Password .
6. Optional: Set the administrator's authentication type.
Face Recognition Terminal User Manual
29