Advertisement
Quick Links
CAAV
WING INSTALL
Left handed unit used for
Instructions - right will be opposite
Recommended tools
4MM ALLEN WRENCH
5MM ALLEN WRENCH
Hardware enclosed
NOTE: all screws provided must be
installed for proper installation and
compliance with product warranty.
CHAIR WITH SCREEN:
CONNECTOR BOLTS
ARE PRE-INSTALLED
ON PANEL
UNIT WILL COME PACKED IN 2 BOXES:
• 1
ST
box will contain the chair with screen
• 2
nd
box will contain the wing
STEP 1:
• Use the 4mm and 5mm allen wrenches to remove
the connector bolts from the chair screen only – do
not remove the connector bolts from the wing
WING WILL COME
WITH H-BRACKETS
PRE-INSTALLED
INSTALLATION INSTRUCTIONS
Advertisement
Related Manuals for JSI CAAV
Summary of Contents for JSI CAAV
- Page 1 CHAIR WITH SCREEN: CONNECTOR BOLTS ARE PRE-INSTALLED CAAV ON PANEL WING INSTALL Left handed unit used for Instructions - right will be opposite WING WILL COME WITH H-BRACKETS Recommended tools PRE-INSTALLED UNIT WILL COME PACKED IN 2 BOXES: • 1...
- Page 2 Bracket” and start threading the bolts by hand until both • Align holes in the “H-Brackets” on the wing with the sets are started. CAAV holes in the screen (where the connector bolts had been • Snug down the bolts using the 4mm and 5mm allen wrenches.
Need help?
Do you have a question about the CAAV and is the answer not in the manual?
Questions and answers