[Note on assembly 1](Control Plate Panel Attachment)
Peel off the release paper from the center of the backside of the Plate ControlPanel, align
the Plate ControlPanel with the reference holes for determining the attachment
locations, and then attach the Plate ControlPanel to the FrontBezel unit.
①
Mark
Parts No.
①
DD1-0624-000
Plate ControlPanel̲DP-V2411
FrontBezel unit
F
tB
l
Reference hole for determining the
(two holes on the left and right)
(two holes on the left and right)
Description
Page 33
it
attachment locations
Qty
1