Description Of Menus; Switching On/Off - EdilKamin Italiana Camini IDROPOINT Installation, Use And Maintenance Manual

SYNOPTIC PANEL
key to set the desired environmental temperature
(AIR) or to enter the menu
key to set the water temperature (H
on/off or confirm/quit menu key
indicates that the chrono-thermostat has been pro-
grammed for automatic ignition at set times

DESCRIPTION OF MENUS

• To access the menus, press and hold the key
onds (the LED switches off).
Press the key or the key
ing menus:
- M1: Set clock
- M2: Set time programme
- M3: Language
- M4: Stand-by
- M5: First load
- M6: Status
- M7: Technical calibrations (TAC)
- M8: Type of pellets (TAC)
- M9: Quit
• To confirm the desired menu, press the key
• To return to the previous menu, press the key
• To quit the menu, press the key

SWITCHING ON/OFF

To switch the stove on/off, press the key
LED on
stove operating
LED flashing stove being switched off or in alarm state
LED off
stove off
INSTRUCTIONS FOR USE
O)
2
for 2 sec-
, to scroll through the follow-
.
for 3 seconds.
for 6 seconds.
for 3 seconds.
indicates an alarm condition
indicates the functioning of the pellet-loading motor
indicates functioning pump
indicates functioning spark plug
OPERATING
The stove has two operating modes:
- MANUAL:
In the MANUAL operating mode, the water temperature at
which the stove must operate is set, independently from the
temperature of the room in which it is installed.
The stove automatically adjusts the operating power on the ba-
sis of the water temperature, to reach or maintain the set water
temperature.
To select the MANUAL operating mode, press the key
(the LED comes on) and the message 'AIR' appears with an
indication of the temperature.
Pressing the key will increase the temperature until the
message 'MAN' appears on the display (above 40°).
To set the water temperature, press the key
comes on) and the message 'H
By means of the key
can be changed as desired.
- AUTOMATIC
In AUTOMATIC mode, it is possible to set the water tempera-
ture and the desired temperature of the room where the stove is
installed.
When the desired environmental temperature (AIR) or the wa-
ter temperature (H O) is reached, the stove will automatically
2
adjust itself to minimum power.
To set the desired environmental temperature (AIR), press
(the LED comes on); the operating temperature at that mo
ment will be displayed; using the key
temperature can be changed as desired.
- 212
-
(the LED
O' will appear.
2
or the key , the water temperature
or the key , the