Table of Contents
Advertisement
10
Installing Commander Site Controller Software
Note:
1. On the PC, browse to the Commander Site Controller Suite Software
2. Double-click on the Petro_Suite_Installer file.
3. Reboot the Commander Site Controller by removing power cord from the
4. After the Commander Site Controller has completely shutdown, plug in
5. Allow the Commander Site Controller to come up fully. "A9" displays in
6. On the PC, click Install. Do not powercycle or reboot the system during
Commander™ Site Controller Software Installation
The "red" boxes are displayed only in this guide to bring attention to the
details in these steps. They are not displayed on the screen.
folder and open it.
back of the unit or from the outlet.
the power cord. The Commander Site Controller permits installation of
software only within the first five minutes after a reboot.
the LED window.
installation. Also, it is normal for the Commander Site Controller to
reboot during the various installation steps.
July 25, 2013
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Commander Site Controller and is the answer not in the manual?
Questions and answers