Assa Abloy Assa compact 3000 Series Fitting Instructions

TEMPLATE
26
57
19
4
(o25 for Escape Nightlatch,
Escape Sash Lock and
Escape Deadlock)
See note on front cover
(o25 for Funxion handles)
o7
Drill for DIN
Severe Duty
handles
o10
(When fitting 3020 with
3508 - Drill hole on
INSIDE FACE of door
only)
See note on front cover
Drill as required for handles to be used.
Drill holes for cylinder, handle spindle and handle
screws as appropriate for the products to be fitted.
*NOTE: On Bathroom lock only, drill holes in shaded
area instead of normal cylinder cut-out.
Centre
line of
door
On 44mm doors, fold along line and place around edge of door
77
Drill for
other handles
o20
Drill for
ASSA round
rose handles
*26.5
*o10
*o6
*o7
22
See note on front cover
3000 Series Locks
FITTING INSTRUCTIONS
LOCKS WITH DIFFERENT INTERNAL AND EXTERNAL FUNCTIONS -
Single cylinder only (without thumbturn): Standard specification for 3069B,
3061, 3059 and 3062. On the OUTSIDE face of the door, drill and prepare oval
hole for cylinder fitting, ensuring hole does not pass beyond the centreline of the
door.
Half Set of Handles: Standard specification for 3069, 3069B, 3061, 3059 and
3062. On the INSIDE face of the door, drill a 25mm diameter hole for handle
spindle, ensuring hole does not pass beyond the centreline of the door.
Internal Status Indicator 3508: Standard specification for 3020.
On the INSIDE face of the door, drill a central 10mm diameter hole, ensuring hole
does not pass beyond the centreline of the door.
ASSA ABLOY Door Solutions, Units 3-4, ZK Park, 23 Commerce Way, Croydon, CR0 4ZS
Telephone: 020 8688 5191
CF2 10/07