Advertisement
Quick Links
Advertisement
Related Manuals for Youngman BoSS StairMAX 700 Mk2
Summary of Contents for Youngman BoSS StairMAX 700 Mk2
- Page 1 BoSS StairMAX (Cam-Lock Guardrail) Aluminium Tower 700 Climbing Rung 3T - Through the Trap Door BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK www.bossaccesstowers.com...
-
Page 2: Table Of Contents
9 - 16 Build Method Pre-use Safety Inspection Checklist Instruction manual EN 1298 - IM - en BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK... -
Page 3: Safety First
PASMA website at www.pasma.co.uk. Verification and assessment documentation is held by Youngman Group Ltd. If you need further information, design advice, additional guides or any other help with this product, please contact Youngman on +44 (0)1621 745900 or email uk.customercare@wernerco.com... - Page 4 Movement of the assembled prefabricated tower scaffold - The BoSS StairMAX 700 Mk2 tower system MUST NOT be moved once erected. - Always dismantle it and rebuild at the new location. - The pre-use checklist on the final page shall be used to determine tower integrity.
- Page 5 Props The BoSS StairMAX 700 Mk2 tower shall be adequately propped or tied to prevent lateral movement. They must be fitted at regular 4.0m intervals. To improve stability, additional props or ties can also be fitted at lower levels.
- Page 6 'locked' position. Ensure wind locks are engaged before Ensure Cam-Locks are engaged. moving onto the deck levels. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK...
-
Page 7: Component Diagram
PORTAL LADDER FRAME Mk2 1.3m HORIZONTAL BRACE INSTRUCTION MANUAL ADJUSTABLE LEG & BASE PLATE 1.64m DIAGONAL BRACE BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK www.bossaccesstowers.com... -
Page 8: Quantity Schedule
Platform Heights Above 5.0m (INTERNAL USE ONLY) When used internally, platform heights up to 11.0m can be achieved with the use of props. Please refer to page 5 for guidance. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK www.bossaccesstowers.com... -
Page 9: Build Method
The procedure illustrated shows a 7.0m working height tower build. Youngman recommend two persons are used to build BoSS Towers. Above 4.0m height, it is essential that at least two persons are used. Only climb the tower from the inside. - Page 10 Brace as shown. This will become the higher 'upstair' end of the tower. Ensure both gates open the same direction as shown. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK...
- Page 11 Diagonal Brace in position shown. Ensure interlock clips on frame members are in the 'locked' position BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK...
- Page 12 The upper clamp of Stabilisers must be at least 1.5m above the bottom of the frame. Where possible, Stabilisers must also have a minimum outstand of 1.2m. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK www.bossaccesstowers.com...
- Page 13 Do not climb onto the deck until it is fully guardrailed. Ensure the gate is fully engaged before climbing. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK...
- Page 14 Fit one 1.3m Trap Door deck onto the 8th rung above the platform deck as shown. Ensure wind locks are engaged. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK...
- Page 15 Ensure it sits squarely around deck and does not impede the opening of the trap door in the deck. THE TOWER IS NOW COMPLETE. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK...
- Page 16 Reinsert pin and engage clip To dismantle a BoSS tower: Simply follow the assembly steps in reverse, ensuring that the 3T method is followed. BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK...
-
Page 17: Pre-Use Safety Inspection Checklist
United Kingdom f: +44 (0) 1621 859845 e: uk.customercare@wernerco.com w: www.bossaccesstowers.com INSTRUCTION MANUAL PART NO. 108791 BoSS IS A REGISTERED TRADEMARK OF YOUNGMAN GROUP LTD © YOUNGMAN GROUP LTD - 03/05/2016 FOR UP TO DATE INFORMATION ON THIS PRODUCT CHECK www.bossaccesstowers.com...
Need help?
Do you have a question about the BoSS StairMAX 700 Mk2 and is the answer not in the manual?
Questions and answers