Removing Jammed Paper - Epson EcoTank ET-8500 Series User Manual
Hide thumbs
Also See for EcoTank ET-8500 Series:
- Quick start manual (4 pages) ,
- User manual (347 pages) ,
- Quick start manual
Table of Contents
Advertisement
Solving Problems
Removing Jammed Paper
Caution:
!
❏ Be careful not to trap your hand or fingers when opening or closing the scanner unit. Otherwise you may be
injured.
❏ Never touch the buttons on the control panel while your hand is inside the printer. If the printer starts operating,
it could cause an injury. Be careful not to touch the protruding parts to avoid injury.
1. Close the document cover if it is open.
2. Open the scanner unit with both hand until it locks.
3. Remove the jammed paper.
>
>
Paper Gets Jammed
Removing Jammed Paper
197
- Quick Links:
- Loading Paper
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EcoTank ET-8500 Series and is the answer not in the manual?
Questions and answers
How do I install a printer driver for my new ET-8500 printer?
ANDREW KULANKO
how to select paper feeder
To select the paper feeder on the Epson EcoTank ET-8500 Series, follow these steps:
1. Load Paper:
- Load paper into the desired paper source:
- Rear paper feed (for single sheets or special media).
- Cassette 1 (for photo paper).
- Cassette 2 (for plain paper).
2. On the Printer’s Control Panel:
- Tap the Home button if not already on the home screen.
- Select Settings or Paper Settings.
- Choose the paper source (Cassette 1, Cassette 2, or Rear Feed).
- Confirm the paper type and size for the selected source.
3. On Your Computer (Printer Driver Settings):
- Open the Print dialog in your application.
- Select the Epson ET-8500 printer.
- Click Preferences or Properties.
- Under the Main or Paper Source tab, choose the correct paper source.
- Set the paper type and size to match what’s loaded.
- Click OK to save settings and print.
Make sure the paper type and size settings match between the printer and the driver to avoid errors.
This answer is automatically generated
Printer will not print or scan anything. Says memory device is not inserted. Insert memory card. I have never used a memory card with this printer