Rop Setting; Connect Setting; Rop Ip Setting; Camera Ip Setting - Panasonic AK-HRP1000G Operation Manual

18 ROP SETTING

For details on operations and settings, refer to the following section in the Operating Instructions.
"34 ROP SETTING"
NOTE
[B.GAMMA SW] and [ECC BTN CTRL] do not function.
Only "HD" can set for [DTL VOL] and [SKIN DTL SW].
Only "ABS" can be set for [IRIS LEV MODE].
When the unit is connected with the AJ-CX4000, the following functions can be assigned to buttons.
[CONTROL(MENU)1] to [CONTROL(MENU)5]
- SHUT (SHUTTER SPEED)
- PED (PEDESTAL)
- H.CHRM (CHROMA)
- GAIN
- TEMP (COLOR TEMP)
- FLARE
- GAMMA
- KNEE
- W.CLIP (WHITE CLIP)
- DRS
- HD.D (DETAIL)
- HD S.DTL (SKIN TONE DTL)
- MATRIX
- C.CORR (COLOR CORRECTION)
- A.IRIS (AUTO IRIS SETTING)
- CAM_MN (CAM MENU)
[MODE(ON/OFF)1] to [MODE(ON/OFF)5]
- GAMMA
- FLARE
- KNEE
- W.CLIP (WHITE CLIP)
- H.COL (HIGH COLOR)
- HD.D (DETAIL)
- UP, DOWN
[ASSIGN BUTTON]
- GAMMA
- FLARE
- KNEE
- W.CLIP (WHITE CLIP)
- HD.D (DTL)
- H.COL (HIGH COLOR)
[USER ASSIGN]
- M.GAMM (GAMMA)
- H.CHRM (CHROMA)
- DRS
- KNEE.S (KNEE SLOPE)
- HD S.DTL (SKIN DTL)

19 CONNECT SETTING

When connecting the unit with the AJ-CX4000, set the camera connection method to "LAN(AJ2)".
For details on operations and settings, refer to the following section in the Operating Instructions.
"35 CONNECT SETTING"

20 ROP IP SETTING

For details on operations and settings, refer to the following section in the Operating Instructions.
"36 ROP IP SETTING"

21 CAMERA IP SETTING

For details on operations and settings, refer to the following section in the Operating Instructions.
"37 CAMERA IP SETTING"
ROP Menu (during AJ-CX4000 Connection)
- 32 -