ZCS Azzurro 3PH HYD5000 ZSS User Manual page 109

ID161 ForceShutdown
ID162 RemoteShutdown
ID163 Drms0Shutdown
ID165 RemoteDerating
LogicInterfaceDer
ID166
ating
AlarmAntiRefluxin
ID167
g
ID169 FanFault1
ID170 FanFault2
ID171 FanFault3
ID172 FanFault4
ID173 FanFault5
ID174 FanFault6
ID177 BMS OVP
ID178 BMS UVP
ID179 BMS OTP
ID180 BMS UTP
ID181 BMS OCP
ID182 BMS Short
User Manual 3PH HYD5000-HYD20000-ZSS
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1. of 16/03/2021 - Application: GID
Forced shutdown
Remote shutdown
DRMs0 shutdown
Remote derating
Logic interface derating
Anti-reflux derating
Fan1 error
Fan2 error
Fan3 error
Fan4 error
Fan5 error
Fan6 error
BMS overvoltage alarm
BMS undervoltage alarm
BMS high temperature
alarm
BMS low temperature
alarm
BMS overload warning
when charging and
discharging
BMS short-circuit alarm
battery and inverter for any errors.
The inverter has undergone a forced
shutdown
The inverter has undergone a forced
remote shutdown
The inverter has undergone a forced
DRMs0 shutdown
The inverter has undergone a remote
load derating
The inverter is loaded by running the
logic interface.
The inverter is programmed to
prevent counter-current
sagging.
Check whether fan 1 of the inverter is
working properly
Check whether fan 2 of the inverter is
working properly
Check whether fan 3 of the inverter is
working properly
Check whether fan 4 of the inverter is
working properly
Check whether fan 5 of the inverter is
working properly
Check whether fan 6 of the inverter is
working properly
Internal lithium battery error; turn
off the inverter and battery, wait 5
minutes and then turn them on again.
If the errors still occur, contact
technical support
load
109/138