Advertisement
Quick Links
Please carefully read the below warnings and instructions.
!
Save the instructions for future reference.
• Before installing please contact your local council for semi permanent structure requirements.
• For permanent fixture contact your local council and use appropriate fixings.
• This gazebo is a Semi-Permanent structure. Damage caused by extreme weather conditions including heavy rain or high winds is not
covered under warranty.
• Please carefully read all instructions before assembly and use.
• Please separate and identify all parts, ensuring that you have all parts listed.
• To avoid damage to your gazebo, it is recommended that you assemble it on a clean, protected surface.
• Washers must be used when indicated during the assembly process.
• Loosely tighten the nuts and then securely tighten when all are in position. Be careful not to over tighten the nuts during assembly.
• As an added precaution we strongly recommend you tighten any loose components after an initial period of use (around 3-6 months).
For assured longevity and safe use of your gazebo, we recommend regular checking and tightening of any bolts.
IMPORTANT SAFETY INSTRUCTIONS
• The ground for erecting and anchoring the gazebo is required to be a level, solid and a safe surface.
• Beware of existing utilities underground.
• Keep away from any electrical installations and transportation devices.
• Never climb, sit, or stand on the structure.
CORAL BAY LOUVRE PANEL GAZEBO
Assembly Instructions
Item Number: 0177358
Advertisement
Related Manuals for Mimosa CORAL BAY LOUVRE PANEL GAZEBO
Summary of Contents for Mimosa CORAL BAY LOUVRE PANEL GAZEBO
- Page 1 CORAL BAY LOUVRE PANEL GAZEBO Assembly Instructions Item Number: 0177358 Please carefully read the below warnings and instructions. Save the instructions for future reference. • Before installing please contact your local council for semi permanent structure requirements. • For permanent fixture contact your local council and use appropriate fixings.
- Page 2 Leg tube Leg tube Roof frame Roof frame Supporting frame Louvre adjustment Component Centre Louvre Adjustment Component Edge Louvre Adjustment Component Edge Roof frame Shutter Shutter Incline Stabiliser Brace Incline Stabiliser Brace Roof Edge Panel Roof Edge Panel...
- Page 3 Cover plate Inclined Bracket Corner Bracket Angled Connection Bracket Leg base cover Supporting Plate Supporting Plate Inclined connection plate Handle loop Drainage Cover Drainage Cover Handle Washer Spacer Washer...
- Page 4 M6 x 18mm Bolt M6 x 30mm Bolt M6 x 35mm Bolt Hook ST4.2 x 12mm Screw M4 x 18mm Bolt Stake M6 x 39mm Bolt Allen key Screw driver Spanner...
- Page 5 Connect the leg base covers (M) to the leg tubes (A &A1) using bolts (AA). Tighten securely using Allen key (JJ) Screw the hook(DD) into the leg tube(A1).
- Page 6 Connect supporting plates (N&N1) to the leg tubes (A & A1), using bolts (AA). Tighten securely using Allen Key (JJ).
- Page 7 Insert the angled connection bracket (L) into the two edge louvre adjustment components (D1 & D2). Tighten the bolts (AA) using Allen Key (JJ) Repeat the above process for the opposite Connect the supporting frame (C) and the edge louvre adjustment components (D1 & D2) with bolts (AA).
- Page 8 Secure the leg tubes (A & A1) to the edge louvre adjustment components (D1 & D2) using bolts (AA). Repeat for the other end.
- Page 9 Align the roof frame (B) between the two leg tubes and connect using bolts (HH). Tighten securely using Allen Key (JJ). Connect roof frame(B) and leg tubes with the incline stabiliser braces (G &G1), using bolts (CC) & (AA). Tighten securely using Allen Key (JJ).
- Page 10 Connect the roof frame (B1) Join the inclined connectio n and the leg tubes with the plates (P) to the roof frame incline stabiliser braces (G& (B1) using bolt (AA). G1), using bolts (CC and AA). Tighten securely using Allen Key (JJ). Repeat on both sides Connect the two roof frames (B1) to the leg tubes, using bolts (HH).
- Page 11 Connect two pieces of roof frame(B1) and leg tube with bolt(HH) and tighten Connect the roof frame (B1)and leg tube with the four incline stabiliser braces (G & G1), using bolts (CC & AA).Tighten securely using Allen Key (JJ).
- Page 12 Attach the roof frame (E) to the louvre adjusting components (D1 &D2), using bolts (AA). Tighten securely using Allen key (JJ). Cover the roof frame (B & B1) with the corner brackets (K1) using screws (EE) and screwdriver (KK). Refer image below.
- Page 13 Insert the inclined bracket (K) into the centre louvre adjustment component (D) and secure using bolts (AA & BB). Tighten securely using Allen Key (JJ). Attach the handle loop (Q) to the protruding parts on the lower end of the centre louvre adjustment component (D), using bolts (FF). Tighten securely using screwdriver (KK).
- Page 14 Attach the centre louvre adjustment component (D) to the roof frame (E & B1), using bolts (AA). Secure the other end of D to the inclined connection plate (P) using bolts (AA). Tighten securely using Allen Key (JJ).
- Page 15 Secure the shutter (F1) to the edge louvre adjustment component (D1) with bolt (BB) and washer (S1). Secure the other end to the centre louvre adjustment component (D) in the same way.
- Page 16 Place the spacer washers (S2) between the roof frame (J & E). Place the cover plate (J1) on the roof frame (J) and after aligning the holes secure with bolt (BB) and washer (S1). Repeat for the other holes.
- Page 17 Before installing the shutter (F), use the handle (R) to rotate the louvre arms from position 1 to position 2 (as pictured above).
- Page 18 Insert the shutter(F) as shown, place the edge of the shutter(F)to the tip of the bayonet,then push shutter down until it clicks into place.
- Page 19 As shown, connect edge adjusting component D1 or D2 with roof frame(H), cover leaking hole(Q2), align the hole, and tighten the bolt(AA) Tighten the bolt(AA)
- Page 20 Your gazebo is now fully assembled. If your gazebo is located on a grassed surface, use the stakes (GG) to secure it in position (as pictured). Please carefully read the below warnings and instructions. Save the instructions for future reference. •...
Need help?
Do you have a question about the CORAL BAY LOUVRE PANEL GAZEBO and is the answer not in the manual?
Questions and answers