Troubleshooting; List Of Codes; Types Of Codes - Arjohuntleigh Ninjo Instructions For Use Manual

6 TROUBLESHOOTING

6.1 List of codes

Code Description
U1 Lime descaler low level
U2 Process agent low level
U3 Rinse-aid low level
U7 Warning of high temperature for
goods
U9 Inactivity warning
H6 Start attempt with door open
H7 Cannot lock door
H8 Cannot unlock door
F1 Temperature sensor error
F4 Logic error in door, door locked but
not closed.
F7 Disinfection temperature not reached.
F8 Door open/unlocked during process
F9 Settings error (E2 error)
F10
F11 Leakage
F13 Program error

6.2 Types of codes

The tables below describe the error messages that can
be generated as well as possible measures.
Measure
Top up descaler agent.
Top up process agent.
Top up rinse-aid
Let the goods cool down.
The machine has been inactive for 72 hours.
A program with an empty chamber must
be run before using the machine to clean goods.
Close the door (the machine makes a new start
service personnel.
Acknowledge the error as described above. Close the
door correctly. Make a fresh start attempt. If the error
Acknowledge the error as described on the previous
personnel.
• Ux is an information code.
• Hx is a handling code.
• Fx is an error code.
19