Manage Ssid Isolation For All Wifi Networks - NETGEAR WAX204 User Manual

WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
A login window displays.
If your browser does not display the login window but displays a security message
and does not let you proceed, see Log in to the access point after initial setup on
page 30.
3. Enter the access point local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select BASIC > Wireless.
The Wireless Network page displays.
5. Select the Wireless 2 or Wireless 3 button.
The settings for the Wireless 2 or Wireless 3 network display.
6. Scroll down to Allow access to wired ports and select a radio button:
• Enable. WiFi clients that are connected to the selected network can access devices
that are connected to the LAN ports.
• Disable. WiFi clients that are connected to the selected network cannot access
devices that are connected to the LAN ports. (If devices that are connected to
the LAN ports are set up for communication over the Internet, WiFi clients might
still be able to reach these devices.)
7. Click the Apply button.
Your settings are saved.

Manage SSID isolation for all WiFi networks

By default, as an added security measure, SSID isolation is enabled for all WiFi networks
(SSIDs) on the access point, preventing communication between WiFi clients that are
associated with different WiFi networks on the access point. Those WiFi clients can still
communicate with each other over the Internet.
You can disable SSID isolation so that clients that are associated with different WiFi
networks on the access point can communicate with each other.
To manage SSID isolation for all WiFi networks:
1. Launch a web browser from a computer or mobile device that is connected to the
access point network.
2. Enter http//www.routerlogin.net in the address field.
Basic WiFi and Radio Features 69 User Manual