Using Lsi Software Raid Configuration Utility; Creating And Adding A Configuration - NEC Express 5800 Series Maintenance Manual

Chapter 2 Useful Features
5.3

Using LSI Software RAID Configuration Utility

5.3.1

Creating and adding a configuration

1. Run the LSI Software RAID Configuration Utility.
2. To create a new configuration, choose Configure and then New Configuration from the TOP menu
(Management Menu).
To add a configuration, choose Configure and then View/Add Configuration.
Run the LSI Software RAID Configuration Utility
Set new configuration data (disk array/virtual drive settings)
Check the virtual drive settings
Initialize the virtual drive
Execute the Consistency Check
Exit the LSI Software RAID Configuration Utility
Important
When a configuration is created by choosing New Configuration, the existing
configuration data is cleared. To add configuration data to the existing
configuration, choose View/Add Configuration.
• When Easy Configuration is chosen to create a configuration, the Virtual Drive
Note
capacity cannot be specified. If you want to specify the capacity, choose New
Configuration or View/Add Configuration.
• The capacity of the virtual drive for RAID10 is set as the maximum capacity. You
cannot specify the capacity.
• Skip Consistency Check for RAID0.
Express5800/T110f-S, R110f-1E, T110f-E Maintenance Guide
5. RAID System Configuration
105