Related Manuals for GPRINTER DT-92I
Summary of Contents for GPRINTER DT-92I
- Page 1 Smart Thermal Printer DT-92I User’s Manual Specification GP Intelligent Printers Series...
-
Page 2: Table Of Contents
Table Of Contents 1. INTRODUCTION ......................4 1.1SAFETY WARNING ...................... 4 1.2 SAFETY NOTICE ......................5 2.GENERAL INFORMATION .................... 5 3. PRINTER PARTS ......................6 4. PAPER INSTALLATION ....................7 5. SPECIFICATION ......................9 6. QUICK START ......................10 7. BASIC OPERATION ....................10 8. -
Page 3: Introduction
Thanks for choosing our new smart thermal printer DT-92I, please read this manual carefully for using it normally. DT-92I is a micro commercial printer with bar code and bill print function which can support you safe reliable effective and practical print quality. -
Page 4: Safety Notice
1.2 Safety notice (1) Install the printer on the stable surface. Choose firm and level surface where avoid vibration. (2) Keep enough space for printer operation and maintenance. (3) Keep printer away from water, sunshine, high lights and heat source. (4) Do not use and store the printer under high temperature, moist and seriously polluted environment. -
Page 5: General Information
(16) Please download and install APP which our website listed. 2. General Information 2.1 Introduction Widely use like in traffic, post, commercial activities, logistic, enterprise management and so on. You can connect by standard USB, Ethernet Port, Bluetooth, WIFI, with the other external equipment to get Temperature-sensitive Printing. - Page 6 Intelligent network printing function. 3、Printer Parts 1: IPS screen & touch panel 2: Top cover 3: ON/OFF button 4: Top cover open button 5: Base housing 6: Power Switch 7: Power port 8: Cash drawer port 9: Ethernet port 10: USB port1 11: USB port 2 12: USB port 3 13: USB port 4（reserved USB port for connecting to PC)
- Page 7 4、 Paper installation DT-92I is compatible with ESC and TSPL commands, including Receipt mode (in Thermal paper roll) and Label mode (in adhesive thermal paper) . The way of changing the print mode in between Label mode and Receipt mode: Turn off the printer power, open the DIP cover on the bottom of the printer, setting DIP-1 to ON status is for receipt mode;...
- Page 8 (2) Thermal label roll installation:...
-
Page 9: Specification
5、Specification Thermal label mode Thermal receipt mode Display 7" IPS screen , resolution: 1024*600 7" IPS screen , resolution: 1024*600 Operation Five-Touch ,Capacitive Touch Panel Five-Touch ,Capacitive Touch Panel Operation System Android 4.4.2(KitKat) Android 4.4.2(KitKat) Quad-core ,integration GPU , 1.6GHZ Quad-core ,integration GPU , 1.6GHZ DDR3 , 1GB DDR3 , 1GB... - Page 10 CODE128, EAN128, ITF, CODE39, CODE93, UPC-A , UPC-E , JAN13(EAN13) , EAN13, EAN13+2, EAN13+5， EAN8, EAN8+2, Barcode JAN8(EAN8) , CODE39 , CODABAR , ITF , EAN8+5, CODABAR, UPC-A, UPCA+2, UPCA+5, CODE93 , CODE128 , QRCode UPC-E, UPCE+2, UPC-E+5, QRCode Font 0～Font 8 ASCII FontA: 12*24dot GB18030, Simplified/Traditional/Korea:...
- Page 11 (2) The printer power jacks is a 3-pin socket and for 12V/4A DC power input, please plug the DC cord connector into the printer’s power jack properly. CAUTION: ■ When connecting or disconnecting the plug, always hold the plug but not the cord. ■...
- Page 12 7.2 Print the test page Select 【Gprinter】app to enter in, and then click “settings”...
- Page 13 】(Note: if printer is taken receipt mode, Choose printer model【GP2120TF(label) please choose printer model as【 GP2120TF(Receipt) 】 ; the way of changing the print mode between label mode and receipt mode: Turn off the printer, open the DIP cover on the bottom of the printer, set DIP-1 to ON status is ESC receipt mode;...
- Page 14 ⑦：Click “print test page”. NOTE：DIP Switches function Instruction DIP-8 Function SW-1 Print Mode Receipt Label SW-2 Beeper SW-3 Density Dark Light SW-4 Density SW-5 Language SW-6 Language Alphanumeric Korean BIG5 GB18030 SW-7 Serial SW-8 Baud rate 38400 115200 19200 9600 CAUTION：...
- Page 15 7.3 Screen unlocked/ dormant/ wake When the printer is power on and IPS screen is light up, press ON/OFF button, the screen will turn to in sleep mode. When the screen is in sleep mode, press ON/OFF button, the screen will be light up again.
-
Page 16: Printer Cleaning
7.10 OTA It will show “ check for system updates” on the top left corner of the screen when connect to the network, for reminding user to update system. If you need to upgrade, click “Online Upgrade” to get the latest upgrade package, and then click “Download” to download the upgrade package to a local disk, after the download is completed, click the “Upgrade Now”... - Page 17 ■ Always turn off the printer power before cleaning the printer. ■ Do not touch print head by hand, tweezers is not allowed to use for cleaning, otherwise the print head and platen roller and sensor may be damaged. ■ Do not touch IPS screen using metal objects, Do not use tweezers to scratch IPS screen. ■...
Need help?
Do you have a question about the DT-92I and is the answer not in the manual?
Questions and answers