Page 4
RISK OF ELECTRIC SHOCK DO NOT OPEN THE MONITOR. OPENING MONITOR BACK COVER WILL VOID YOUR WARRANTY. This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
Before Using the Product. Installation Space Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product. Make sure to allow some space. Do not install near heater or any other high temperature product or humidifier. Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight for an extended period of time.
Page 6
Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the warranty as well. Contract Pixio directly for all RMA issues. Take note of elevation and temperature zone warnings on the adapters.
Cleaning the Product. Take the following steps when cleaning. 1 Power off the product and computer. 2 Disconnect the power cord from the product. Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
Control Panel. Menu Short Cut Select Input from Auto Source, DP, HDMI1(2.0), HDMI2(1.4) Adjust Brightness Down Choose Preset Colors (FPS / RTS / Standard) Left Right Choose Crooshairs Jog Button Multi directional button that helps navigate. Main OSD Navigation Button Press Move the OSD Menu Move up on the OSD Menu Down...
Page 16
OSD Menu. Resolution: 1920x1080@240Hz Switch the signal input to AUTO, DP, HDMI1 or HDMI2. Input Source Auto Source Brightness/Contrast Color Setting HDMI1 [2.0] HDMI2 [1.4] Picture Quality Setting Display Setting Audio Setting OSD Setting User Setup Other Setting V1.0...
Page 17
Resolution: 1920x1080@240Hz Input Source Brightness BRIGHTNESS: Adjust the display brightness value from 0 to 100. Brightness/Contrast Contrast Color Setting CONTRAST: Adjust the display contrast value from 0 th 100. Picture Quality Setting Display Setting DCR: Select Dynamic Contrast Ration feature ON or OFF. Audio Setting OSD Setting User Setup...
Page 18
Gamma: Change the display Gamma Value to: 1.8-2.6 Resolution: 1920x1080@240Hz Picture Mode: Change the picture mode to Standard, FPS, or RTS. Input Source Gamma Brightness/Contrast Picture Mode Standard Color Setting Color Temperature Normal Color Temperature: Change the display color temperature value to Picture Quality Setting Normal, Warm, Cool, DCI-P3 or User.
Page 19
Resolution: 1920x1080@240Hz Input Source Sharpness Sharpness: Change the display Sharpness value from 0 to 100. Brightness/Contrast Response Time Color Setting Black Balance Response Time: Select the Response Time feature from Low, Middle, Picture Quality Setting High, or turn it off. Display Setting Audio Setting Black Balance: Change Black balance Level 0 to 20.
Page 20
Resolution: 1920x1080@240Hz Input Source Aspect Ratio Wide Screen Aspect Ratio: Change the display aspect ration to Wide Screen, Brightness/Contrast 4:3, 1:1, or Auto. Color Setting Picture Quality Setting Display Setting Audio Setting OSD Setting User Setup Other Setting V1.0...
Page 21
Resolution: 1920x1080@240Hz Input Source Mute Mute: Turn On or Off to mute the audio source. Brightness/Contrast Volume Color Setting Picture Quality Setting Volume: Change the audio source volume from 0 to 100. Display Setting Audio Setting OSD Setting User Setup Other Setting V1.0...
Page 22
LANGUAGE: Change the OSD menu display language. Resolution: 1920x1080@240Hz Input Source Language English OSD H-POSITION: Adjust the horizontal position of the OSD menu Brightness/Contrast OSD H-Position value from 0-100. Color Setting OSD V-Position Picture Quality Setting OSD Transparency OSD V-POSITION: Adjust the vertical position of the OSD menu value Display Setting OSD Time Out from 0-100.
Page 23
Resolution: 1920x1080@240Hz Input Source User1 Save User Setup: Load/Save all settings on the monitor. Brightness/Contrast User2 Save Color Setting User3 Save Picture Quality Setting Display Setting Audio Setting OSD Setting User Setup Other Setting V1.0...
Page 24
FreeSync (Adaptive Sync): Turn FreeSync On or Off. HDR: Turn HDR On or Off (requires DP or HDMI1 input). Resolution: 1920x1080@240Hz LoS: Choose crosshair shape. Input Source FreeSync [Adaptive Sync] Brightness/Contrast Firmware Update: Update the monitor Firmware with the proper Color Setting Crosshair(LoS) LOS3...
Page 25
Adaptive-Sync. (AMD FreeSync or Nvidia G-Sync.) FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency. This feature will eliminate screen tearing and lag during game play. Improve your gaming experience. The displayed FreeSync menu items on the monitor may vary, depending on the monitor model and compatibility with the AMD graphics card.
Page 26
If you have any questions or comments, please contact us below. USA: cs@pixiogaming.com UK & EU: support@pixiogaming.co.uk For your warranty information, please visit www.pixiogaming.com [USA] www.pixiogaming.co.uk [UK & EU]...
Need help?
Do you have a question about the PX5 HAYABUSA 2 and is the answer not in the manual?
Questions and answers