PROFIBUS-DP Bus Adapter
4.2 Bosch Rexroth Fieldbus Adapter
Bosch Rexroth fieldbus adapter is able to control Frequency Converter Fe
through PROFIBUS-DP fieldbus. Main functions of the fieldbus adapter are as
below:
Sending control commands to frequency converter (such as start, stop, jog-
●
ging, etc.).
Sending given frequency signal to frequency converter.
●
Reading working status information from frequency converter (such as run-
●
ning or not, rotation direction, rotation speed, error message, etc.).
Resetting frequency converter in case of fault.
●
PROFIBUS network of Rexroth Fe series frequency converters through connec-
tion via PROFIBUS adapter is shown in the figure below:
Fig. 4-1: PROFIBUS network structure
DOK-RCON01-PROFIBUS***-IB04-EN-P
Bosch Rexroth AG
Overview
15/35