Huawei Speed Wi-Fi NEXT W06 Notes Of Usage

・ As instruction manuals of the product, refer to "Quick Start Guide", "Notes on usage" (this manual), or "取扱説明書 詳細版 (Full Instruction Manual)"
(Japanese) available on the au homepage. Collectively, they are called "Instruction Manual" in this manual.
・ In this manual, "Speed Wi-Fi NEXT W06" is referred to as "the product".
Using the product
• Before using the product, be sure to read the "Safety Precautions (Observe Strictly)" of "Notes on usage" to ensure correct
use.
• Before you assume that the product is malfunctioning, check for possible remedies in "Troubleshooting" in "Quick Start Guide".
• During communication, hold the device farther than 1.5 cm away from your body without including any metals.
• Communication is not possible even inside the service area in places where the signal does not reach (e.g. tunnels and
basements). Also, communication is sometimes not possible in a place where the signal reception is poor. Communication is
sometimes interrupted if you move to a place where the signal reception is poor.
• Since the product uses radio waves, the possibility of communication intercepts by third parties cannot be eliminated
(However, WiMAX 2+, LTE and UMTS system has highly secure confidential communication features).
• The product supports the au World Service. Related network services explained in this manual vary by region or the service.
• Since the product is a radio station under the Radio Law, you may be asked to temporarily submit the product for inspection
in accordance with the Radio Law.
• The IMEI information of the product is automatically sent to KDDI CORPORATION for maintenance and monitoring operational
status.
• Before using the product overseas, check the relevant laws and regulations of the country/region you visit.
• The Company is not liable for any damages arising from earthquakes, lightning, storms, floods or other natural disasters, as
well as fires, actions by third parties, other accidents, intentional, mistaken, or incorrect use by the customer, or use under
other unusual conditions outside the responsibility of the Company.
• The Company is not liable for any incidental damages (change/disappearance of described content, loss of business
income, disruption of business, etc.) arising from use of or inability to use the product.
• The Company is not liable for any damages arising from failure to observe the described content of the "Instruction Manual".
• The Company is not liable for any damages arising, for example, from malfunction caused by combination with connected
devices or software not related to the Company.
• Settings etc. may sometimes be altered or lost due to faults, repair or other handling of the product. The Company is not
liable for any damage or lost income resulting from the alteration or loss of these data.
• It is recommended that you keep a copy of important data on your computer's hard disk etc. Whatever the cause of the
defect or malfunction may be, the Company assumes no responsibility for alteration or loss of saved data.
• You can use the product under the WiMAX 2+ network environment. However, UQ Communications Inc., is not liable for the
quality of the product.
• Contents registered in the product might be altered or lost in an accident, fault, repair or mishandling. Be sure to keep a copy
of important contents. Note that Company assumes no responsibility for any damages or lost profits resulting from altered or
lost contents.
• The product uses liquid crystal for its display panel. The display response speed may become slow when the ambient temperature
is low. It is because of the property of liquid crystal and not a malfunction. It returns to its normal state at room temperature.
• Although the display panel used on the product is made using high-precision technology, some pixels (dots) might be lit or
out at all times. This is not a malfunction.
• Do not discard the product together with general garbage. Please cooperate in the collection of the product (including
optional accessories) when it is no longer needed to protect the environment and effectively use resources. Old products are
collected at au shops and other places.
* "The Company" as appears in the manual refers to the following companies:
Sold by: KDDI CORPORATION·OKINAWA CELLULAR TELEPHONE COMPANY
Imported by: HUAWEI Technologies Japan K.K.
Manufactured by: HUAWEI TECHNOLOGIES CO., LTD.
* Reproduction of the content of this manual in part or in whole is prohibited.
* The content of this manual is subject to change without notice.
* Every effort has been made in the preparation of this manual. Should you notice any unclear points, omissions, etc., feel free
to contact us.
Safety Precautions (Observe Strictly)
■ Before using the product, thoroughly read these safety precautions for proper use.
■ These "Safety Precautions" describe instructions that should be observed to prevent bodily injury to the customer and
others as well as damage to property using the product.
■ This symbol indicates that bodily injury or damage to property may directly and immediately result from improper use.
DANGER This symbol indicates the potential and imminent danger of death or serious injury
from improper use.
WARNING
This symbol indicates the possibility of death or serious injury
CAUTION This symbol indicates the possibility of minor injury
improper use.
*1 Serious injury: This refers to loss of sight, injury, burns (high- and low-temperature), electric shock, broken bones, injuries
with residual aftereffects from poisoning, etc., and injuries requiring hospital admission for treatment or long-
term hospital attendance as an outpatient.
*2 Minor injury: This refers to injuries, burns (high- and low-temperature), electric shock, etc. that do not require hospital
admission for treatment or long-term hospital attendance as an outpatient.
*3 Physical damage: This refers to extended damage to buildings, furniture, livestock, pets, etc.
■ Explanation of graphic symbols used in this manual
Indicates that handling with wet hands is not
Indicates an action that is not allowed.
allowed.
Indicates that disassembly is not allowed. Indicates an action that must be done.
Indicates that use in a place where the product is
Indicates that the power plug must be disconnected
likely to get wet or allowing the product to get wet is
from the power outlet.
not allowed.
■ Precautions common to the main unit, internal battery, charging equipment, au IC card,
USB Type-C to Micro B adapter (sample), peripheral devices
DANGER
Do not use, store or leave the equipment in locations subject to high temperatures or accumulation of heat (e.g.
by the fire, near a heater, under a kotatsu or bedding, in direct sunlight, in a car in the hot sun).
Doing so might cause fire, burns, injury, electric shock, etc.
Do not put the equipment in or near microwave ovens, cooking appliances such as IH cooking heaters, or high
pressure containers such as pressure cookers.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not splash sand, soil or mud, or do not directly place the equipment on them. Also, do not touch the
equipment with hands with sand etc. adhered.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not charge the internal battery when the product gets wet with liquids such as water (drinking water, sweat,
seawater, urine of pet animals, etc.).
Or, do not charge the internal battery in a place where the product is exposed to moisture such as bathroom.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not apply strong pressure or break the product. Especially be careful when bringing the product putting in
a pocket of clothes, so as not to let the product hit against surroundings or being caught between objects.
Doing so might cause fire, burns, injury, etc. due to damage of the internal battery.
* The following are examples that you should be careful of:
• Sitting or squatting when the product is put in a pocket of trousers or skirt
• Catching them in a door or a door of car when the product is in a pocket of outer wear
• Stepping on the product on a soft object such as a sofa, bed, or bedding, or on a floor
Do not attempt to remove the internal battery from the product.
Doing so might cause fire, burns, injury, etc.
Do not disassemble or modify the equipment.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not let the equipment get wet with liquids such as water (drinking water, sweat, seawater, urine of pet
animals, etc.).
Doing so might cause fire, burns, injury, electric shock, etc.
Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet animals, etc.) to get inside of
the connection terminal or charging terminal.
Doing so might cause fire, burns, injury, electric shock, etc.
Use only optional accessories specified by au for the product.
Use of unspecified accessories might cause fire, burns, injury, electric shock, etc.
WARNING
Do not subject the equipment to strong force, impacts, or vibration such as letting it fall, stepping on it or
throwing it.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not allow conductive materials (such as metal objects and pencil lead) to come into the connection
terminal or charging terminal, or dust to get inside of it.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not cover or wrap the equipment with a cloth or bedding in use or while charging.
Doing so might cause fire, burns, etc.
If charging does not finish after specified time, stop charging.
Failure to do so might cause fire, burns, injury, etc. due to overcharge etc.
Power off the product before you step into a place where flammable gas can leak, such as gas stations, or a
place where dust is generated. Stop charging if you charge the internal battery.
Using the product in a place where flammable gas leaks might cause explosion, fire, etc.
If you notice anything unusual about the equipment such as an unusual odor, abnormal noise, smoke generation,
overheating, discoloration or deformation during operation, charging or storage, perform the following measures.
• Disconnect the power plug of charging equipment (sold separately) from the power outlet.
• Power off the product.
Failure to do instructions above might cause fire, burns, injury, electric shock, etc.
Do not use damaged equipment.
Notes on usage
Doing so might cause fire, burns, injury, etc.
Do not place the product on an unstable or inclined platform.
Doing so might cause the device to fall etc. and cause injury.
Do not use or keep the equipment in a place where it is very humid, dusty, or subject to high temperature.
Doing so might cause fire, burns, electric shock, etc.
If a child uses the product, his/her guardian should teach how to handle the product to avoid improper use.
Failure to do so might cause injury etc.
Keep the equipment out of the reach of babies and infants.
Failure to do so might cause accidental swallowing, injury, electric shock, etc.
Be careful when using the product continuously or while charging. The temperature of the product might rise.
Also, be careful not to keep touching the product unintentionally and continuously, for example, by putting the
product in a pocket, falling asleep, etc.
The temperature of the product or charging equipment might rise when using continuously such as performing data
communication or while charging. If you are directly in contact with a high temperature part continuously, a redness
of skin, itch, rash, low-temperature burn, etc. might occur depending on your physical condition.
■ Main unit
Do not throw the product into fire or apply heat.
Doing so might cause fire, burns, injury, etc.
Do not apply excessive force such as sticking a sharp object (nail etc.) into the product, hitting it with a hard
object (hammer etc.), or stepping on it.
Doing so might cause fire, burns, injury, etc.
If the internal substance of the product contacts your eyes, mouth, etc., immediately rinse with clean water and
see a doctor right away.
Failure to do so might cause blindness, medical problem, etc. due to effects of the internal substance of the product.
Do not allow liquids such as water (drinking water, sweat, seawater, urine of pet, etc.), metal pieces, burnable
items, and other foreign objects to get inside the Nano IC Card slot.
Do not insert au IC card into wrong slot or in wrong orientation.
Doing so might cause fire, burns, injury, electric shock, etc.
Power off the product before boarding an airplane.
Use of mobile devices on board is restricted. Follow the instructions of each airline.
The radio waves from the product might adversely affect on-board electronic equipment.
Prohibited acts related to mobile device usage on an airplane might be punished by law.
Follow the instructions of each medical facility for the use of mobile devices on their premises.
Power off the product in a place where the use is prohibited.
The radio waves from the product might affect electronic devices or electronic medical equipment.
If you are wearing any electronic medical equipment, check with the relevant medical electronic equipment
manufacturer or vendor whether the operation might be affected by radio waves.
The radio waves from the product might have harmful effects on electronic medical equipment etc.
Power off the product near electronic devices or equipment operating on high precision control or weak signals.
The radio waves from the product might interfere with the operation of electronic devices or equipment.
* The following are some electronic devices or equipment that you should be careful of:
Hearing aids, implantable cardiac pacemaker, implantable cardioverter defibrillator, other electronic medical
equipment, and other automatically controlled devices or equipment. If you use an implantable cardiac pacemaker,
implantable cardioverter defibrillator, or other electronic medical equipment, check with the medical electronic
equipment manufacturer or vendor whether the operation can be affected by radio waves.
Be careful about broken glasses or exposed internal part of the product if the display panel is broken.
Touching damaged or exposed part might cause burns, injury, electric shock, etc.
If the internal battery leaks or gives off a strange smell, immediately remove it from the vicinity of open flames.
The leaking liquid might ignite fire, catch fire, explode, etc.
Be careful not to allow a pet etc. to bite the product.
Doing so might cause fire, burns, injury, etc. because of ignition, burst, heat or leaking of the internal battery.
If the display panel is damaged and the internal substance runs out, do not allow it to contact with your skin
such as face or hands, clothes, etc.
Doing so might cause injury etc. on your eyes or skin.
*1 to a person If the internal substance gets into your eyes, mouth, etc., or contacts skin or clothes, immediately rinse the contacted
area with clean water.
If the fluid gets into your eyes, mouth, etc., immediately see a doctor after rinsing.
*1 to a person from improper use.
Do not discard the product together with general garbage.
Doing so might cause fire, burns, injury, etc. Also, it might cause environmental destruction. Bring the unnecessary
*2 to a person or physical damage *3 from
product into a sales outlet such as au shop. Or if your local municipality has a recycling program, dispose of them as
provided for.
If the substance leaks out from the internal battery, do not allow the fluid to contact with your skin of face or
hands, clothes, etc.
Doing so might cause injury etc. on your eyes or skin.
If the internal substance gets into your eyes, mouth, etc., or contacts skin or clothes, immediately rinse the contacted
area with clean water.
If the fluid gets into your eyes, mouth, etc., immediately see a doctor after rinsing.
To use the product in a car, check with automobile manufacturer or dealer to determine how the car device is
affected by radio waves before using.
Depending on vehicle model, the radio waves from the product might affect the vehicle
malfunction. In that case, stop using the product immediately.
If abnormalities on skin are developed by using the product, immediately stop using and take medical treatment.
The use of the product might cause itching, rashes, eczema, or other symptoms depending on the user's physical
condition.
For material of each part, see "Material list".
Watch the display in an adequately bright place taking a certain distance from it.
Watching it in a dark place or closely might reduce visual acuity etc.
■ Charging equipment
Do not use the specified charging equipment (sold separately) if the cord gets damaged.
Doing so might cause fire, burns, electric shock, etc.
Do not touch the specified charging equipment (sold separately) if you hear thunder.
Doing so might cause electric shock etc.
Do not short-circuit the charging terminal while it is connected to a power outlet. Do not touch the charging
terminal with your hands, fingers, or any part of your body.
Doing so might cause fire, burns, electric shock, etc.
Do not place a heavy object on the cord of specified charging equipment (sold separately), or do not apply
unreasonable force to the cord such as pulling.
Doing so might cause fire, burns, electric shock, etc.
When you connect or disconnect the specified charging equipment (sold separately) to or from a power outlet,
do not allow it to contact metal strap or other metal object.
Doing so might cause fire, burns, electric shock, etc.
Do not connect a voltage converter for overseas travel (travel converter) to the specified charging equipment
(sold separately).
Doing so might cause ignition, overheating, electric shock, etc.
Do not put excessive force to the connection part with the specified charging equipment (sold separately)
connected to the product.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not touch the cord of specified charging equipment (sold separately), charging terminal, power plug with
wet hands.
Doing so might cause fire, burns, electric shock, etc.
Use the adapter only on the specified power supply and voltage.
When charging the product overseas, use the specified charging equipment for global use (sold separately).
Using the incorrect power supply and voltage might cause fire, burns, electric shock, etc.
AC adapter: 100V AC (Make sure to connect to a household AC power outlet.)
AC adapter for global use: 100V to 240V AC (Make sure to connect to a household AC power outlet.)
Clean dust from the power plug.
Using it with dust adhered might cause fire, burns, or electric shock.
When you connect the specified charging equipment (sold separately) to a power outlet, insert it firmly.
Insecure insertion might cause fire, burns, electric shock, etc.
When you disconnect a power plug from a power outlet, do not apply excessive force to it such as pulling the
cord of specified charging equipment (sold separately). Instead, grasp the specified charging equipment (sold
separately) to disconnect.
Pulling the cord of specified charging equipment (sold separately) might damage the cord and cause fire, burns,
electric shock, etc.
When connecting/disconnecting the specified charging equipment (sold separately), do not apply excessive
force such as pulling the cord. Insert/remove the plug straight against a terminal.
Incorrect insertion/removal might cause fire, burns, injury, electric shock, etc.
Stop using immediately if the connection terminal is deformed such as being bent. Do not use it with the
deformation restored.
Failure to do so might cause fire, burns, injury, etc. due to short-circuit of the charging terminal.
When you do not use the specified charging equipment (sold separately), disconnect the power plug from a
power outlet.
Leaving the product whose power plug is connected might cause fire, burns, electric shock, etc.
Immediately disconnect a power plug from a power outlet if liquid such as water (drinking water, sweat,
seawater, urine of pet animals, etc.) is on the equipment.
Failure to do so might cause fire, burns, electric shock, etc. due to short-circuit by adhered object etc.
Before cleaning, remove a power plug from a power outlet.
Failure to do so might cause fire, burns, electric shock, etc.
Do not touch the specified charging equipment (sold separately) for a long time when it is connected to a
power outlet.
Doing so might cause burns etc.
■ USB Type-C to Micro B adapter (sample)
CAUTION
DANGER
WARNING
■ au IC card
■ Using near medical equipment or in healthcare facilities
CAUTION
s electronic equipment to '
These precautions are provided to prevent the product from damage and ensure that performance can be fully demonstrated.
Thoroughly read these precautions to ensure correct use.
WARNING
■ Precautions common to the main unit, internal battery, charging equipment, au IC card,
■ Main unit
CAUTION
WARNING
Do not use in a very humid place such as bathroom.
Doing so might cause fire, burns, electric shock, etc.
Do not touch the connector if you hear thunder.
Doing so might cause electric shock etc.
Do not short-circuit the charging terminal while it is connected to the product, a PC, etc. Do not touch the
terminal with your hands, fingers, or any part of your body.
Doing so might cause fire, burns, electric shock, etc.
Do not allow the connector to contact a metal object such as metal accessory when inserting or removing
from the product, a PC, etc.
Doing so might cause fire, burns, electric shock, etc.
Do not put excessive force to the connection part of the connector while the connector is connected to the
product, a PC, etc.
Doing so might cause fire, burns, injury, electric shock, etc.
Do not touch the terminal with wet hands.
Doing so might cause fire, burns, electric shock, etc.
Wipe dust off the terminal.
Using it with dust adhered might cause fire, burns, or electric shock.
When connecting the connector to the product, a PC, etc., insert it firmly.
Insecure insertion might cause fire, burns, electric shock, etc.
Insert or remove the connector straight against the terminal.
Incorrect insertion/removal might cause fire, burns, injury, electric shock, etc.
Stop using immediately if the connection terminal is deformed such as being bent. Do not use it with the
deformation restored.
Doing so might cause fire, burns, injury, etc. due to short-circuit of the charging terminal.
Disconnect the connector from the product, a PC, etc. when it is not used.
Keeping with the connector connected might cause fire, burns, injury, electric shock, etc.
Immediately disconnect the connector from the product, a PC, etc. if liquid such as water (drinking water,
sweat, seawater, urine of pet animals, etc.) comes in.
Failure to do so might cause fire, burns, electric shock, etc. due to short-circuit by adhered object etc.
Before cleaning, disconnect the connector from the product, a PC, etc.
Failure to do so might cause fire, burns, electric shock, etc.
CAUTION
Do not touch the connector for a long time when it is connected to the product, a PC, etc.
Doing so might cause burns etc.
If abnormality on skin are developed by using the USB Type-C to Micro B adapter (sample), immediately stop
using it and take medical treatment.
The use of the product might cause itching, rashes, eczema, or other symptoms depending on the user's physical
condition.
For material of each part, see "Material list".
CAUTION
Be careful of the cut surface not to hurt your body parts such as fingers when handling the au IC card.
Cut surface may be sharp and it might cause injury etc.
WARNING
If you have electronic medical equipment such as an implantable cardiac pacemaker or an implantable
cardioverter defibrillator, carry or use the product 15 cm or more away from the implant at all times.
The radio waves from the product might have harmful effects on the operation of electronic medical equipment.
If you need to use electronic medical equipment other than implantable cardiac pacemaker or implantable
cardioverter defibrillator outside medical facilities such as treating at home, consult the relevant electronic
medical equipment manufacturer for effects on the equipment by radio waves.
The radio waves from the product might have harmful effects on the operation of electronic medical equipment.
If there is any chance that the distance between the product and a person closest to you may get shorter than 15
cm such as when you cannot freely move around, set the product not to emit radio wave in advance (power off).
A person in close proximity may be equipped with electronic medical equipment such as an implantable cardiac
pacemaker or an implantable cardioverter defibrillator. The radio waves from the product might have harmful effects
on the operation of electronic medical equipment.
Follow the instructions given by the respective medical facility regarding the use of the product on their premises.
The radio waves from the product might have harmful effects on the operation of electronic medical equipment.
Material list
Part
Main unit Display panel (Touch panel)
Exterior case
Power button
Nano IC Card slot cover
USB Type-C to Micro B adapter Protective film
(sample)
Exterior case
microUSB plug (Terminal part)
microUSB plug (Shield part)
USB Type-C plug (Terminal part)
USB Type-C plug (Shield)
Handling precautions
USB Type-C to Micro B adapter (sample), peripheral devices
● Do not apply excessive force to the product during use. Be sure not to put the product into a tightly packed bag or place
a heavy object on the product in a bag. Sitting on the product in your pocket might damage the display panel or internal
circuit board resulting in a malfunction.
If a connector is connected to the external connection terminal in such a condition, the connector might be damaged resulting
in a malfunction. Such damage and malfunction are not covered by the warranty, even if there is no external damage.
● Do not use the product in extremely hot, cold or humid places (Use within an ambient temperature range of 5℃ to 35℃
and humidity range of 35% to 85%).
● Do not use in places subject to lots of dust or vibration. Doing so might cause a malfunction.
● Clean the external connection terminal with dry cotton swabs etc. every now and then. Soiled terminals might cause poor
connection. Do not exert a strong force to clean the external connection terminal to prevent deformation.
● Clean the product with a soft dry cloth (such as used for cleaning eyeglasses). Forceful rubbing with a dry cloth may scratch
the display panel. The display panel may become stained if water or dirt is kept on the surface. Wiping the product using
alcohol, thinner, benzene, detergent, glass cleaner, etc. might erase the printing on the outer casing resulting in a malfunction.
● Use as far away as possible from a land-line phone, TV, or radio to prevent them from being affected.
● The temperature of the product might rise while charging etc. depending on the situation, but this is not abnormal.
● Do not place near corrosive chemicals or in places where corrosive gas is generated. Doing so might cause a malfunction.
● Do not use when you can hear thunder from outside. Doing so might cause lightning strikes or electric shock.
● Be sure to use the specified charging equipment only. Use of other charging equipment might cause a malfunction.
● Do not put the product in a cooking apparatus such as microwave oven or a pressure vessel. Doing so might cause a
malfunction.
● The customer is not allowed to disassemble, modify or repair the product. Doing so might cause a malfunction.
Modification of the product is in violation of the Radio Law and Telecommunications Business Act.
● Do not allow a part of your body such as your finger or a conductive foreign object (metal fragment, pencil lead, etc.) to come
into contact or get inside of the external connection terminal to avoid short-circuit. Doing so might cause a malfunction.
● Do not splash liquid such as water on the product. Also, never use in humid places such as bath areas, or use with wet
hands. Doing so might cause a malfunction due to short-circuit or corrosion of electronic circuits.
● Malfunctions due to water wetting or humidity are not covered by the warranty and charges will be incurred for repairs.
● In the event that the product gets wet while charging, immediately disconnect the power plug of specified charging
equipment (sold separately).
● Do not use the product while driving a car or motorbike, riding a bicycle, or walking. Use of a mobile device while driving a
car or motorbike is prohibited by law. Use of a mobile device while riding a bicycle might be punishable by some regulations.
● Using or charging the product in a bag or while it is covered with bedding might cause a malfunction.
● When using charging equipment, a PC, etc., insert/remove the connector straight against the terminal. Make sure the
orientation of the connector is correct. Unless it's correct, it might cause a malfunction.
● Do not store the product in places subject to direct sunlight (e.g. in a car), places that get hot, places that get extremely
cold, and in humid or dusty places. Doing so might cause a malfunction.
● Do not place the product on unstable location such as wobbly platform or inclined place. Especially be careful while
charging. The product might drop resulting in cause of malfunction.
● Do not exceed the rating of a power outlet or wiring device when charging the product, for example, by starburst connection.
● Since the battery is built into the product, you cannot replace it by yourself. For replacing the battery, contact an au shop
or Customer Service Center.
● Do not forcefully press, tap or intentionally subject the display panel to strong impact. Doing so might cause scratches or
damage.
● Do not forcefully press your fingernail, sharp object or hard object against the button or the surface of the display panel.
Doing so might cause scratches or damage.
● The touch panel is designed to be lightly touched by fingers. Do not apply strong pressure with your finger or sharp
pointed object (such as fingernail, ballpoint pen and pin) on the touch panel.
In the following cases, the touch panel might not respond, or an error in operation might occur.
• Operating with gloved hand
• Operating with tip of fingernail
• Operating when a foreign object is put on the panel
• Operating with a protective sheet or sticker attached on the panel
• Water droplet or dew condensation is on the display panel
• Operating when your finger is wet or moist by sweat.
Material <Surface treatment>
Glass
PC resin <coating>
PC resin <coating>, TPU resin
PC resin <coating>, TPU resin
OPP film
PC resin + PBT resin
Gold-plated
Nickel-plated
Gold-plated
Nickel-plated