Operation Procedure; Probe - Hitachi C22P Instruction Manual

3. Operation Procedure

3.1 Probe

1) Confirm that the probe and the attachment are cleaned, disinfected
and if necessary sterilized.
2) Attach the attachment to the probe according to 3.2.
3) Connect the probe to the ultrasound diagnostic scanner, operate the
scanner, and adjust the image, all according to the instructions
given in the operation manual for the ultrasound diagnostic scanner
with which the probe is used as connected.
4) The relationship between the direction of the probe and the image
is shown in Fig. 4. The right-left orientation mark on the image
indicates the index mark on the probe.
Fig. 4
Probe
Image
Relationship between the directions of the
probe and the Right-left orientation mark
Index mark
Right-Left
orientation
mark
-8- Q1E-EP1457