Page 1
User Manual Blood Pressure Monitor TMB-2084-T Arm Type Thank you very much for selecting TRANSTEK Blood Pressure Monitor TMB-2084-T. Guangdong Transtek Medical Electronics Co., Ltd. Please read the user manual carefully and throughtly so as to ensure the Zone B, No.105 ,Dongli Road, Torch Development District,...
Table of Contents CATALOGUE INTRODUCTION........................2 General Description Indications for Use Contraindications Measurement Principle Safety Information LCD Display Signal Monitor Components List BEFORE YOU START......................9 The Choice of Power Supply Installing and Replacing the Batteries Setting Date, Time and Measurement Unit Setting the voice switch Setting the clock Setting the user ID...
(TMB-2084-T). The monitor features blood pressure measurement, pulse rate measurement and the result storage. The design provides you with two years of reliable service. Readings taken by the TMB-2084-T are equivalent to those obtained by Symbol for “THE OPERATION Symbol for “TYPE BF APPLIED a trained observer using the cuff and stethoscope auscultation method.
Page 4
INTRODUCTION INTRODUCTION CAUTION CAUTION implanted, electronical devices, patients with pre-eclampsia, premature ventricular beats, was clinically investigated according to the requirements of ISO 81060-2:2018. atrial fibrillation, peripheral, arterial disease and patients undergoing intravascular therapy or arterio-venous shunt or people who received a mastectomy. Please consult your doctor the manufacturer.
Page 5
Pulse display Pulse in beats per minute please contact the SERVICE PERSONNEL of Transtek. Don’t open or repair the device by yourself in the event of malfunctions. The device must only be serviced, repaired and Measurement Unit of the blood pressure opened by individuals at authorized sales/service centers.
BEFORE YOU START INTRODUCTION The Choice of Power Supply Monitor Components 1.Battery powered mode: 6VDC 4×AAA batteries 2.AC adaptor powered mode: Component list of CUFF pressure measuring (Please only use the recommended AC system AIR HOSE 1 Cuff 2 Air Hose Please unplug the adaptor to depart from 3 PCBA the using utility power.
BEFORE YOU START BEFORE YOU START Setting Date, Time and Measurement Unit 3.When you get the right year, press “START/STOP” to set It is important to set the clock before using your blood pressure down and turn to next monitor, so that a time stamp can be assigned to each record that step.
BEFORE YOU START BEFORE YOU START 7.After the unit is set,the LCD will display “dOnE” and then it will turn off. 5.Repeat steps 2 and 3 to set the [HOUR] and [MINUTE]. Setting the voice switch When the monitor is off,press both “STRAT/STOP” and “SET” button, it will enter voice setting mode.
BEFORE YOU START BEFORE YOU START Setting the clock Setting the User ID 1. When the monitor is off, long press both “SET” and “MEM” button, 1.When the monitor is off, hold press “SET” button and then it will enter clock setting mode. Press “MEM” or “SET” button to the user ID will shows.
BEFORE YOU START Install the App and Pair-Up Search your test information Download the Transtek Health app from APP Store or Google Play. After binding the app, back to the beginning page and click Install the APP, and register an account.
Interference may occur in the vicinity of equipment marked with the following 5. Sit comfortably with your tested arm resting on a symbol . And TMB-2084-T may interfering vicinity electrical equipment. flat surface. Place your elbow on a table so that Sensitive people, including pregnant women pre-eclamptic and those who the cuff is at the same level as your heart.
After the measurement was finished, the symbol will start blinking, Before you start the measurement,Download the Transtek Health and the data will start transmitting. ( Please connect the app during the app from APP Store or Google Play,and turn on the Bluetooth.
DATA MANAGEMENT DATA MANAGEMENT Delete the Records Recall the Records If you did not get the correct measurement, you can delete all results for the selected user by following steps below. 1. When the monitor is off, please hold press the “MEM”,it will display the latest record first when the records are less 1.
INFORMATION FOR USER INFORMATION FOR USER Tips for Measurement Maintenance Measurements may be inaccurate if taken in the following In order to get the best performance, please follow the circumstances. instructions below. Avoid touching water, Put in a dry place and clean it with a dry cloth in case.
ABOUT BLOOD PRESSURE ABOUT BLOOD PRESSURE What are systolic pressure and diastolic pressure? Why does my blood pressure When ventricles contract and pump blood out of the Systolic Diastolic fluctuate throughout the heart, the blood pressure reaches its maximum value blood discharging blood entering vein...
TROUBLESHOOTING SPECIFICATIONS This section includes a list of error messages and frequently Battery powered mode: 6VDC 4×AAA batteries asked questions for problems you may encounter with your blood AC adaptor powered mode: pressure monitor. If the products not operating as you think it Power supply (Please only use the recommended AC should, check here before arranging for servicing.
-- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that For more information about our products, please visit www.transtek.cn.you can get to which the receiver is connected. customer service, usual problems and customer download, transtek will serve you -- Consult the dealer or an experienced radio/TV technician for help.
EMC GUIDANCE EMC GUIDANCE EMC Guidance Complied Standards List EN ISO 14971:2012 / ISO 14971:2007 Medical devices - The ME EQUIPMENT or ME SYSTEM is suitable for home healthcare environments Risk management Application of risk management to medical devices Warning:Don’t near active HF surgical equipment and the RF shielded room of an ME system for magnetic EN ISO 15223-1:2016 / ISO 15223-1:2016 Medical devices.
EMC GUIDANCE Table 3 Table 2 Guidance and manufacturer’s declaration – electromagnetic Immunity Guidance and manufacturer’s declaration - electromagnetic Immunity Immunity Test IEC 60601-1-2 IMMUNITY Compliance level Radiated RF Test Band Service Modulation Modulation Test level TEST IEC61000-4-3 Frequency LEVEL (Test specifications Electrostatic...
Need help?
Do you have a question about the TMB-2084-T and is the answer not in the manual?
Questions and answers