HITEC OPTIMA SL Manual

2.4GHz 8 Channel
Single Line System Receiver
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions.
European CE notice to users and product statements
- Frequency Range : 2409.2 MHz ~ 2474.0 MHz
- Maximum RF Output power : 100mW
- Hereby, HITEC RCD INC, declares that our (RE type : OPTIMA SL) is in compliance with RED 2014/53/EU.
The full text of the EU DoC is available at the following internet address: www.multiplex-rc.de
FCC notice to users and product statements
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
Operation is subject to the following two conditions; (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
• FRANCE Frequency Range : 2.4056GHz~ 2.4482GHz
Introduction
Thank you for your purchase of the Hitec Adaptive Frequency Hopping Spread Spectrum (AFHSS) 2.4GHz receiver system.
This manual contains the complete directions on how to use the Optima SL receiver We encourage you to review the
entire manual before using these products.
Service & Support Hitec Customer Service
Help is available from the Hitec office through phone support and e-mail inquiries.
Our US office is generally open Monday thru Friday, 8:00AM to 4:30PM PST. These hours and days may vary by season.
Every attempt is made to answer every incoming service call. Should you reach our voicemail, leave your name and
number and a staff member will return your call.
Hitec Website
Make plans to visit the Hitec website, www.hitecrcd.com, on a regular basis. Not only is it full of specs and other
information about the entire Hitec product line, our website's FAQ pages will eventually hold valuable information and
program updates about the module and Optima SL receiver.
The On-Line Community
One of the benefits of the extensive R/C online community is the vast wealth of archived knowledge available.
Hitec sponsors forums on most of the popular R/C websites where a Hitec staff member or representative tries to answer
all manner of product related questions. Bringing together strangers with common interests is proving to be one of the
greatest gifts of the internet. If past history is any guide to the future, we are certain forums will be started about the Hitec
2.4 system and several are certain to stand out as valuable archives of information.
Instruction
Version 2.0
Warranty and Non-Warranty Service
All Hitec products carry a two year from date-of-purchase warranty against manufacturer's defects. Our trained and
professional service representatives will determine if the item will be repaired or replaced. To provide all the necessary
information we need to administrate your repair, visit our website at www.hitecrcd.com and download the repair form,
fill it out and send in your item for repair.
Hitec Service
12115 Paine St. Poway CA 92064
1-858-748-6948
E-mail: service@hitecrcd.com
OPTIMA SL Receiver Specifications & Features
Full Range AFHSS 2.4GHz Receiver
Receiver Model Size
OPTIMA SL
1.85 x 1.14 x 0.59in (47.7 x 29.1 x 15.5mm) 0.77oz (22g)
1. Function Button
- Used for binding the receiver to a module or Hitec 2.4 built-in transmitters,
entering the FAIL-SAFE or Hold feature.
2. Dual LED Status Indicator
- Indicates the set-up process codes and current status of the receiver.
3.PWM Channel, Battery slots and Single Line Input Ports
- Optima SL has 8 slots for PWM, 2 slots for Batteries and 1 slot for Single Line connection.
4. Telemetry Sensor and Data Port*
- A three pin servo plug connector port is featured on the Optima SL. Using the HPP-22 PC interface accessory, this port
serves to facilitate upgrading the device' s software and interfacing the optional onboard sensor station.
*Jumper*
The jumper is installed at the factory and is used when the receiver is powered by an electronic speed control, a
commercially available B.E.C. (battery eliminator circuit), dedicated 4.8 to 6V, NiMH battery pack or a regulated Li-Po
battery. The jumper is removed when the receiver is powered using the SPC feature as described.
Weight Stock Number
27224