Green Fit Application; Green Fit Icon And Its Different Statuses; Warning Messages - Reichhardt GREEN FIT Original Operator's Manual

3

GREEN FIT Application

Using the software of the GREEN FIT controller, you can make vehicle-specific settings and read out informa-
tion on the system.
The figures shown in these instructions have been created on a GreenStar terminal GS3 2630
using software version 3.36.1073.
3.1

GREEN FIT Icon and its different Statuses

The GREEN FIT application is represented by a but-
ton with "GF" labeling and a steering wheel icon
(see Fig. 2).
Depending on the status, the button can have dif-
ferent colors:
(Button is red): An error occurred.
Steering is disabled.
(Button is beige): Steering is swit-
ched on and ready for activation
of the automatic steering.
(Button is green):
steering is enabled. The vehicle
is actively steered.
3.2

Warning Messages

When starting up the terminal and whenever an error
occurs, warning messages are issued by GREEN FIT
(see for example Fig. 3).
Please refer to the list of error codes (see Chapter 4),
to find out how to proceed in such a case.
Press the ESC key (I) to hide the error message.
NOTICE
Automatic
Fig. 2:
Fig. 3:
GREEN FIT icon in the GreenStar terminal
Warning screen
PAG E 9