Samsung Galaxy S7 Edge Basic Manual page 23

• Depending on the Qi specification-compatible product, it may
not receive calls while charging. Charge this product with an
au-approved product.
• Depending on the Qi specification-compatible product,
charging may not be able to start due to mutual interference
with the Osaifu-Keitai ® function. Charge this product with an
au-approved product.
• If you run an application on the product while it is being
charged wirelessly, it may not fully charge.
• Although the product may become warm while it is on the
wireless charger (sold separately), this is not a fault.
• Reception quality may decrease while the product is charging
on the wireless charger (sold separately).
• Do not move the wireless charger (sold separately) and the
product while it is charging.
• After the product has finished charging, the remaining battery
level may decrease, even if the product is left as is.
■ au Nano IC Card 04
• Do not forcibly remove or insert the au Nano IC Card 04. Be
careful not to exert excessive force when inserting the card
into your au cell phone.
• You are responsible for any damage caused by inserting your
au Nano IC Card 04 into some other IC card reader/writer, etc.
• Do not put stickers, etc. on the au Nano IC Card 04.
• Do not insert an au Nano IC Card (LTE) to which a conversion
adapter is attached. Doing so may cause a fault.
• Do not performs actions that may damage the au Nano
IC Card 04 (e.g. using in high temperature areas, tossing
into fire, allowing foreign matter to come into contact with
metal part, subjecting to shock, bending, applying heavy
load, getting wet, etc.). It may cause data loss or other
malfunctions.
■ High-quality Earphone with Microphone (sample)
• Do not wrap the cord around the product. It may lower
its sensitivity and the sound may cut off or noise may be
generated. Do not pull the code to unplug. Do not hang the
phone with the code, either. It may damage the code, connector
plug and the headset connection terminal of the product.
• Be aware not to gather dust on the connector terminal.
Doing so may cause a fault.
• Attach or remove the connector horizontally to or from the
headset connection terminal of the product.
■ SIM card removal tool (sample)
• Do not force the SIM card removal tool (sample).
Doing so might cause it to break or damage.
• When disposing of it, follow the rules regarding disposal in your area.
• Do not use the SIM removal tool (sample) for any other
purposes except for what is written in this manual, also do not
use it on other mobile phones.
Doing so might cause the mobile phone to break or damage it.
■ Camera
• When photographing important occasions, take a trial shot
and check the shot image to make sure it is correctly shot.
• Do not use the camera in places where photographing is not allowed.
■ Copyrights and rights of portrait
• You are not allowed to copy, distribute, publish, modify or
edit the data you shot, recorded or downloaded using this
product without the consent of the copyright holder, except
for personal use, under the copyright law.
In addition, do not use or modify portraits or names of other
individuals without their consent, as it might infringe on rights
of portrait.
Note that shooting and recording may be restricted at some
live performances, shows and exhibitions even for personal use.
• Be careful about the copyright and portrait right when posting
images you shot, etc. on Internet homepages.
21