If you feel any abnormality with your skin, immediately consult
a dermatologist. Itching, rashes, eczema, etc. sometimes
Do
occurs depending on your physical constitution and condition.
The materials of parts used on the desktop holder are as
follows.
Part
Exterior case
Upper case
Lower case
Front hook
Side hook
Charging terminal
Terminal lever
Contacts
Antislip part (rubber part)
CAUTION
Be sure to read the following
cautions before use.
Charge the battery in a stable place. If placed on an inclined
surface or wobbly stand, the product might fall causing injury
Do
or damage. Pay careful attention while vibrator is set. In
addition, do not cover or wrap the product with a cloth or
bedding. Doing so might cause fire or a fault.
When unplugging the plug of the specified charging
equipment (sold separately) from the power outlet, hold and
Do
pull the power plug. If you pull the cable, the cable might be
damaged.
Do not use the common DC adapter 01/03 (sold separately)
with the car engine stopped. Doing so might result in draining
Don t
of the car battery.
Do not touch the specified charging equipment (sold
separately) with wet hands. Doing so might cause electric
No wet hands
shock or a fault.
Do not leave the specified charging equipment (sold
separately) connected to the FJL21 main unit with the battery
Don t
pack removed. Doing so might cause ignition or electric
shock.
12
Material
Surface
treatment
ABS resin
None
ABS resin
None
POM resin
None
POM resin
None
POM resin
None
Phosphor bronze Gold plating
Polyurethane
None
■ au Micro IC Card (LTE)
WARNING
Be sure to read the following
warnings before use.
Do not put the au Micro IC Card (LTE) in a cooking apparatus
such as a microwave oven or a pressure vessel. Doing so
Don t
might cause melting, overheating, fuming, loss of data or a
fault.
CAUTION
Be sure to read the following
cautions before use.
Use only the devices specified by the Company to insert the
au Micro IC Card (LTE) in. Using a device not specified by the
Do
Company might cause loss of data or a fault. For the specified
devices, contact an au shop or Customer Service Center.
Be careful not to hurt your fingers and hands when attaching
or removing au Micro IC Card (LTE) to or from the FJL21 main
Do
unit.
Do not let the au Micro IC Card (LTE) get wet, touch it with
wet hands, or get it dirty. Doing so may cause a fault or
No liquids
damage.
Do not disassemble or modify the au Micro IC Card (LTE).
Doing so might cause loss of data or a fault.
No disassembly
Do not use or leave the au Micro IC Card (LTE) in hot places
such as by the fire or a heater. Doing so might cause melting,
Don t
overheating, fuming, loss of data or a fault.
Do not throw the au Micro IC Card (LTE) into a fire or heat it.
Doing so might cause melting, overheating, fuming, loss of
Don t
data or a fault.
Do not touch the IC (metal) part of the au Micro IC Card (LTE)
or short-circuit it by touching with metal object etc. Static
Don t
electricity may cause change, loss of data or a fault.
Do not drop the au Micro IC Card (LTE) or subject it to strong
impact. Doing so might cause a fault.
Don t