Samsung AIRDRESSER User Manual page 28

Before you start
Registering your appliance to SmartThings
1. Make sure your smartphone is connected to a wireless network. If not, go to Settings,
turn on the wireless connection, and then select an AP (Access Point).
2. Open SmartThings on your smartphone.
3. If a message of "A new device is found.", select Add.
4. If no message appears, select + and select your appliance in a list of devices available.
If your appliance is not listed, select Device Type > Specific Device Model, and then add
your appliance manually.
5. Follow the onscreen instructions to complete registration.
SmartThings overview
Category
Monitoring
Control
Notification
28 English
Untitled-1 28
Function
Cycle Status
Smart Control
Energy Monitoring
Start / Pause / Cancel
Cycle Completed
Description
You can check the current cycle and
options, and the remaining cycle
time.
The Smart Control status is shown
for AIRDRESSER.
You can monitor the energy
consumption status.
Select a cycle and necessary options,
and then select Start / Pause /
Cancel to start and operation, to
stop temporarily, or to cancel the
current operation.
Notifies you the current cycle is
complete.
2020-01-17 AM 11:03:15