Before You Start; Installation - Samsung AIRDRESSER User Manual

Before you start

Installation

Install the product according to the
instructions in this manual and local codes.
Installing the product
1. Select a solid, level location with
adequate space for the following
clearances.
Top
Sides
Rear
- If the minimum clearances are not
met, performance will decrease due
poor ventilation and condensation
may occur on the product exterior.
- Do not install the product in direct
sunlight or hot and cold places.
The ambient temperature must be
between 10 °C-35 °C. If the ambient
temperature is too high or too
low, the product may not operate
normally, or performance may
decrease.
Untitled-1 11
25 mm
5 mm
15 mm
2. Turn the leveling feet (A) clockwise or
counterclockwise to adjust the height
until the product is level.
A
NOTE
If the product wobbles or if you want to
raise the height of the rear side, assemble
the provided rear levelling feet on the
bottom-rear sides of the product.
English 11
2020-01-17 AM 11:03:03