Functions Of Lucy; Instructions For Use; Product Features; Use And Operating Instructions - IMC Toys club Petz Lucy Instructions For Use

Voice command: "SIT" Voice command:
Description: She sits.
Description: She stretches out on the floor.
5
Voice command: "DANCE" Voice command: "GIVE ME A KISS"
Description: She stretches out Description: She gets up and jumps
forwards to kiss you.
on the floor and dances.
Voice command: "BARK" Voice command: "SHAKE HANDS"
Description: She barks Description: She stands on her hind legs
several times and stays still. and moves her forelegs.
Voice command:"SEARCH"
Voice command: "STAND UP"
Description:
Description: She stands
She sniffs the ground.
Voice command:"WALK"
Voice command: "EAT"
Description:
Description: She bends down
She takes some steps forward.
and makes eating sounds.

FUNCTIONS OF LUCY

Voice command: "GET UP"
"LAY DOWN" Description: If she was on the floor,
she gets up. If she was standing up,
she will bark once.
Voice command: "HELLO"
Description: She barks and
stays still.
Voice command:
"ON YOUR HEAD"
Description: She does a handstand.
Voice command: The puppy's name.
For instance: Lucy.
Description: She barks once and stays still,
on her hind legs.
waiting for a voice command.
Voice command: "BURY"
Description: She buries
using her hind legs and forelegs.

PRODUCT FEATURES

Voice commands or orders:
Lucy responds to up to 15 different voice com- To give voice orders, first say the name that
mands. She barks, sniffs, moves, and can even you recorded previously so that she will listen
to you (for example, "Lucy"). If she has under-
give kisses and do handstands. You can call her
stood you, she will bark once. You must wait
whatever you like so that she will answer to you.
for her to stop barking before saying one of the
She also has two buttons for activating some of
following voice orders to her. If she does not
her actions.
recognise your voice order, repeat her name,
wait for her to bark and say the order to her

USE AND OPERATING INSTRUCTIONS

again. Remember that Lucy cannot hear you
IMC TOYS products undergo strict produc-
while she is making sounds or moving. So that
tion controls to guarantee the enjoyment and
she can understand you better, there should
safety of your children. They are easy to use
not be too much noise around you when you
and operate. We are certain that they will pro-
give the voice orders.
vide your children with great entertainment.
Thank you for purchasing one of our products.
The dog includes two buttons (see fig. 3) for
To consult our extensive product catalogue,
performing certain actions directly without
please visit our web page at www.imc.es. voice commands. One of them is located on
her back (B) and, pressing while playing with
her makes Lucy whine sadly and the other, on
OPERATION WITH BATTERIES
her nose, (C) activates the function of sniffing
while playing.
IMPORTANT INFORMATION
NOTE FOR ADULTS
Energy saving mode
Before giving the product to children, first
If you do not play with Lucy for a few seconds
remove all plastic, wires and any other object
if she does not receive any command or order
designed to fasten it during transport.
she will lie down, whine and finally fall sleep. All
This product comes factory-prepared for the
the buttons work to wake Lucy up if she has
"TRY ME" function. The batteries that it in-
fallen asleep. After playing with her, we recom-
cludes are designed for this use. Therefore, it
mend that you turn the switch to the OFF posi-
is possible that they may be spent. If this is the tion so that she is completely turned off.
case, we recommend they should be replaced.
Tips for proper use
The product is distributed in its original Troubleshooting
packaging and for demonstration purposes Lucy not responding, a decrease in the volume
in stores with the selector switch in the TRY-
of the sound, and erratic movement are symp-
ME position (see fig. 1). The product has
toms of dead batteries; they must be replaced.
limited functionality in this position and will
not respond to any voice commands. Turn the MAINTENANCE
switch to the ON position for normal operation.
Cleaning: Only wash the surface of the prod-
uct by hand. Remember that there are mech-
Replacement and installation
anisms and electronic circuits inside it which
This product requires four LR6 (AA) 1.5V alka-
could be damaged when in contact with water.
line batteries (included). Firstly, open the velcro
Use a cloth slightly dampened with water or
closure and set the switch to the OFF position
dry foam, if necessary, and then dry immedi-
(see fig. 1). Remove the safety screw from the
ately with a dry cloth or leave it to dry indoors,
lid of the battery compartment located at the
without exposing to sunlight or direct heat
bottom of the base (see fig. 2). Remove the dead
sources. Do not use detergents or solvents.
batteries. Notice the correct placement of the
Do not use it until it is completely dry. If
batteries in the image (see fig. 2) and place them
the equipment becomes wet, turn it off and
according to the position and polarity indicated.
remove the batteries immediately. Dry the
Replace the lid and the safety screw (for your
children's safety) and finally close the velcro battery compartment with a dry cloth. Leave
closure.
the battery compartment open until it is
Warning! Replacing or handling the battery
completely dry. If you wish, use a hairdryer to
should always be done under the supervision
speed this process up. Do not try to use the
of an adult.
unit until it is completely dry.
Operation
RECOMMENDATIONS FOR RESPONSIBLE
With the switch in the ON position, follow these
USE AND FOR PROTECTING THE
steps if you want to record another name that
ENVIRONMENT
you prefer for the dog besides "Lucy":
Put all the transport packaging, cardboard,
1) Press the dog's left ear (A) (see fig. 3). She will
plastic, etc, in the recycling containers in your
bark once.
neighbourhood.
2) Say the name that you prefer for her. For ex-
Use rechargeable batteries whenever possi-
ample: "Lucy". She will bark twice.
ble.
3) Then repeat her new name to her. For better
Remember to turn off the toy if you have fin-
voice recognition, use a different tone of voice
or intonation until she barks twice. If she does ished playing with it and take out the batteries
not bark twice, repeat her name again until she
if you are not going to be using it again for a
does.
long time.
4) Lastly, repeat the same name. Use a different
If you no longer want the toy and it still works,
intonation this time, too, if you prefer, until she
do not throw it away. Remember that other
barks once. If she does not bark once, repeat
people can still enjoy it, and find bodies or
her name again until she does.
associations that can give it to them.
Now she can recognise the name you have giv-
At the end of the life span of this product, it
en her.
must not be disposed of as normal household
rubbish. It should be delivered to a collection
If you have a claim, please contact the authorised distributor.

INSTRUCTIONS FOR USE

point for recycling electrical and electronic
devices. Consult the symbol on the product,
in the user manual or on the packaging for
more information.
The materials are recyclable in accordance
with their markings. If you recycle materials
or find ways to reuse old devices, you make
a considerable contribution to protecting the
environment.
Please consult the nearest recycling centre or
local authorities.
WARNINGS!
- Warning. Not suitable for children under 3
years of age. It contains small parts which
might be ingested by them. Choking hazard.
- Please keep the packaging for future
reference as it contains very important
information.
- Please note that due to technical improve-
ments this product may differ from the one
that appears in the illustration.
- This product requires 4 type 1.5 V LR6/AA
batteries (included).
- This product is distributed with 4, LR6/AA
batteries for the "TRY ME" function. For
normal operation of the product, it may be
necessary to replace the batteries.
- The batteries or accumulators must be in-
serted according to the polarity indicated in
the illustration.
- Used batteries or accumulators must be re-
moved from the toy; failure to do so could
cause damage.
- Do not mix old batteries with new ones.
- Do not mix different types of batteries.
- Use only those batteries recommended by
the manufacturer or equivalents.
- Non-rechargeable batteries must not be re-
charged.
- The battery terminals must not be bridged or
shorted.
- Changing or handling the batteries must al-
ways be carried out under the supervision of
an adult.
- Remove the batteries from the compartment
if the unit is not going to be used for a long
period of time.
- Please respect the environment and deposit
used batteries in the containers provided.
- Rechargeable batteries are to be removed
from the toy before being charged.
- Rechargeable batteries are only to be
charged under adult supervision.
- This product achieves better performance
using alkaline batteries.
- Read the instructions before use, follow
them and keep them for reference.
- Under the environment with radio
quency interference, the sample may mal-
function and will be resumed to normal after
removal of the interference.
- Under the environment with electrostatic
discharge, the sample may malfunction and
require user to reset the sample.
- Under the environment with Fast Transient,
the sample may malfunction and require
user to reset the sample.
- Remove all elements designed to fasten and
protect the product during transport before
giving it to children (plastic pieces, labels,
wires, etc.).
fre-