Advertisement
PRODUCT FEATURES
Remove the pacifier and see how she cries. There are sound effects and simulated tears (requires distilled water not included with the product).
USE AND OPERATING INSTRUCTIONS
IMC TOYS products undergo strict production controls to guarantee the enjoyment and safety of your children. They are easy to use and operate. We are certain that they will provide your children with great entertainment. Thank you for purchasing one of our products. To consult our extensive product catalogue, please visit our web page at www.imctoys.com.
IMPORTANT INFORMATION
NOTE FOR ADULTS
Before giving the product to children, first remove all plastic, wires and any other object designed to fasten it during transport.
This product comes factory-prepared for the "TRY ME" function. The batteries that it includes are designed for this use. Therefore, it is possible that they may be spent. If this is the case, we recommend they should be replaced.
The product is shipped from the factory for demonstration in shops with the selector in the TRYME position. In this position, the product has limited functionality. Position the selector (A) in the ON position for normal operation (see figure 1).
SAFETY BATTERY USAGE
- Do not use old and new batteries or batteries of different types at the same time. When changing batteries, always replace with a new set of batteries.
- Do not use non-rechargeable batteries with rechargeable batteries or rechargeable batteries of different capacities.
- Observe the polarity marks on the batteries and match them according to the battery compartment markings.
- Remove all batteries from the doll when not in use for an extend period of time.
- Stop using whenever it's wet to avoid shortcircuit.
- Never throw the battery into water on fire or disassemble or weld it.
- Do not use, charge or store the toy near a fire source or in hot and humid place. - This product requires 2 type AAA 1,5V batteries (included).
- This product is distributed with 2, AAA batteries for the "TRY ME" function. For normal operation of the product, it may be necessary to replace the batteries.
- This product achieves better performance using alkaline batteries.
- Use only those batteries recommended by the manufacturer or equivalents.
OPERATION WITH BATTERIES
Replacement and installation
Batteries
2x (AAA)
1.5V
Remember! We recommend removing the water from the doll before changing the batteries to prevent inadvertent spills (see the section of this manual titled "Filling the tank").
This product requires 2 AAA 1.5V batteries. First, open the Velcro fastening on the back of the doll and place the switch (A) in the OFF position (see figure 1) Remove the safety screws from the lid on the battery compartment (B) (see figure 2).
Remove the dead batteries. Notice the correct placement of the batteries in the image (see fig. 2) and place them according to the position and polarity indicated. Replace the lid and the safety screw (for your children's safety) and finally close the velcro closure.
Replacing or handling the battery should always be done under the supervision of an adult.
Before you begin
Filling the tank:
Note: First, make sure there are no items in the vicinity that could be damaged by water (electronic devices, outlets, etc.). Before you begin filling the tank with water, remember to put the pacifier in the doll's mouth (C) (see figure 3) to block the doll's falling tears function.
The access lid is located on the back of the doll's head (D) (see figure 4)
Remove the lid by pressing upward on the tab in order to access the cap on the water tank (E). Turn the cap counter-clockwise to loosen and remove it (see figure 4). The tank has a capacifierty of 80 ml. Fill the tank with water, and for best product performance use distilled water*. Fill the tank up to about 1 cm from the top to prevent overflowing.
*
Use distilled water for household use, such as the kind you may use while ironing, to prevent damage to the tank. The use of tap water can cause damage over time with build up and blockage of tubes that prevent water from circulating which could hinder the crying function. Once the tank is filled, screw the cap back onto the tank (E) and then replace the access lid (D). Before you begin, you need to extract any air remaining inside the water circuit to facilitate the movement of the water through the circuit for correct operation. To do so, remove the pacifier (C) from the doll's mouth and with the doll in an upright position, press the button (F) repeatedly to purge the air from the circuit, until you see drops of water falling from both eyes (see figure 5).
After that, place the pacifier back in the doll's mouth (C) to prevent any more water from falling.
Function
With selector (A) in the ON position and the pacifier in the mouth, the doll will make a series of sounds. When the doll is laid down (see figure 6) it will make relaxing sounds and finally, after about 30 seconds with no interaction, it goes to sleep and does not make any more sounds.
When you sit the doll up and remove the pacifier, the doll begins to cry and the tears begin to fall from the eyes. If the pacifier is placed back in the doll's mouth it stops crying; if you leave the doll without the pacifier the crying becomes more intense for the next minute, after which it quiets down. If you lay the doll down on its back it will also calm down and eventually go to sleep.
Note for adults!
Even though there is only a small quantity of water inside the doll, bear this in mind while your child is playing so as to prevent damage to electronic and electric devices and other products or materials that can be damaged by water. Keep such items away from the play area.
Energy saving mode
To prevent unnecessary wear on the battery, the doll stops making sounds and finally disconnects after one minute without any interaction, although the tears will keep falling if the pacifier is not in the doll's mouth. It is reactivated when the pacifier is placed in the mouth or when the doll is placed in a sitting position. To shut it off correctly, place the pacifier in the doll's mouth and move selector (A) to the OFF position.
Tips for proper use:
Troubleshooting
If the sound volume decreases or if there is no sound, this is an indication that the batteries are dead and need to be replaced. If no water appears in the eyes, first check to make sure there is water in the tank; if the tank is empty, fill it. If the problem persists, extract the air from the circuit as described in this manual (filling the tank). If there is blockage, do not use any sharp objects or items inside the water circuit as this could cause damage to the circuit. Empty the water tank completely and blow air into both eye openings. Then follow the steps for filling the tank with water.
MAINTENANCE
Cleaning
The doll's clothing can be removed for washing, if necessary. To do so, unfasten the Velcro closing at the neck that supports the hood and the Velcro fastening on the back. Carefully remove the clothes from the doll. Keep the pacifier with the clothes so it does not get lost. The clothes should be washed by hand in water no warmer than 40º using detergent for delicates. Do not dry in a dryer and do not place in direct sunlight. Allow the clothes to dry indoors at room temperature. Do not iron the clothes. Only wash the surface of the product by hand. Remember that there are mechanisms and electronic circuits inside it which could be damaged when in contact with water. Use a cloth slightly dampened with water or dry foam, if necessary, and then dry immediately with a dry cloth or leave it to dry indoors, without exposing to sunlight or direct heat sources. Do not use detergents or solvents.
Do not use it until it is completely dry. If the equipment becomes wet, turn it off and remove the batteries immediately. Dry the battery compartment with a dry cloth. Leave the battery compartment open until it is completely dry. If you wish, use a hairdryer to speed this process up. Do not allow the doll to be used until it is completely dry.
Care
To prevent damages to the product or accidental water spills, we recommend removing all water from the doll after each use. To empty the water completely, remove the pacifier from the doll's mouth and remove the lid (E) on the product's water tank. Place the doll face down so that the water empties out of the tank opening. If the doll will not be used for a prolonged period of time once emptied, we recommend that you leave the pacifier out of the mouth to facilitate the evaporation of any water left inside and that you remove the batteries from the doll.
RECOMMENDATIONS FOR RESPONSIBLE USE AND FOR PROTECTING THE ENVIRONMENT
Please recycle all packaging cardboard and plastic.
Use rechargeable batteries whenever possible. Remember to turn off the toy if you have finished playing with it and take out the batteries if you are not going to be using it again for a long time. If you no longer want the toy and it still is in working order, please consider donating to others that can still enjoy it.
Please consult the nearest recycling centre or local authorities.
SAFETY PRECAUTIONS
- Please keep the packaging for future reference as it contains very important information.
- Please note that due to technical improvements this product may differ from the one that appears in the illustration.
- Please respect the environment and deposit batteries in appropriate manner.
- Read the instructions before use, follow them and keep them for reference.
- Remove all elements designed to fasten and protect the product during transport before giving it to children (plastic pieces, labels, wires, etc.).
If you have a claim, please contact the authorised distributor.
Manufactured by / Fabricado por: IMC. TOYS, S.A.
Pare Llaurador, 172
08224 Terrassa (Barcelona) SPAIN
www.imctoys.com
Distributed by IMC US
Customer Service:
info.usa@imctoys.com / help.usa@imctoys.com
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the CryBabies and is the answer not in the manual?
Questions and answers