Download Print this page
Mercia Garden Products 8x8 Waltons Vermont Summerhouse General Instructions Manual

Mercia Garden Products 8x8 Waltons Vermont Summerhouse General Instructions Manual

Advertisement

Quick Links

General Instructions
03VER0808-V1
8x8 Vermont Summerhouse
BEFORE YOU START PLEASE READ INSTRUCTIONS CAREFULLY
- Check the pack and make sure you have all the parts listed.
- When you are ready to start, make sure you have the right tools at hand (not supplied)
including a Phillips screwdriver, Stanley knife, wood saw, step ladder and drill with 2mm
bit.
- Ensure there is plenty of space and a clean dry area for assembly.
TIMBER
As with all natural materials, timber can be a ected during various weather conditions.
For the duration of heavy or extended periods of rain, swelling of the wood panels may
occur. Warping of the wood may also occur during excessive dry spells due to an interior
moisture loss. Unfortunately, these processes cannot be avoided but can be helped. It is
suggested that the outdoor building is sprayed with water during extended periods of
warm sunshine and sheltered as much as possible during rain or snow.
Our buildings are pre treated with a water based treatment**; this only helps to protect
the product during transit and for upto 3 months against mould. To validate your
guarantee and ensure longevity of the product, it is ESSENTIAL the building is treated
with a wood preserver within the rst three months of assembly and thereafter in
accordance with the manufactures recommendations. Care must be taken to ensure
the product is placed on a suitable base.
BUILDING A BASE
When thinking about where the building and base is going to be constructed:
Ensure that there will be access to all sides for maintenance work and annual
treatment.
Ensure the base is level and is built on rm ground, to prevent distortion. Refer to
diagrams for the base dimensions, The base should be slightly smaller than the external
measurement of the building, i.e. The cladding should overlap the base, creating a run
o for water. It is also recommended that the oor be at least 25mm above the
surrounding ground level to avoid ooding.
TYPES OF BASE
- Concrete 75mm laid on top of 75mm hard-core.
- Slabs laid on 50mm of sharp sand.
Whilst all products manufactured are made to the highest standards of Safety and in
the case of childrens products independently tested to EN71 level, we cannot accept
responsibility for your safety whilst erecting or using this product.
Refer to the instructions pages for you speci c product code
Please retain product label and instructions for future reference
x2
All building's should be
erected by two adults
For ease of assembly, you
MUST pilot drill all screw
holes and ensure all screw
heads are countersunk.
2mm Drill bit
**Protim Aquatan T5 (621)**
Your building has been treated with Aquatan.
Aquatan is a water-based concentrate which is diluted with water, the building as been treated by the correct
application of Aquatan solution and then allowed to dry.
Aquatan is a decorative nish to colour the wood, which is applied industrially to timber fence panels and
garden buildings.
Aquatan undiluted contains: boric acid, sodium hydroxide 32% solution, aqueos mixture of sodium dioctyl
sulphosuccinat and alcohols: 2, 4, 6-trichlorophenol.
For assistance please contact customer care on: 01636 880514
Mercia Garden Products Limited,
Sutton On Trent,
Newark,
Nottinghamshire,
NG23 6QN
www.merciagardenproducts.co.uk
Winter = High Moisture = Expansion
Summer = Low Moisture = Contraction
CAUTION
Every e ort has been made during the
manufacturing process to eliminate the
prospect of splinters on rough surfaces of the
timber. You are strongly advised to wear gloves
when working with or handling rough sawn
timber.
P 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the 8x8 Waltons Vermont Summerhouse and is the answer not in the manual?

Questions and answers

Summary of Contents for Mercia Garden Products 8x8 Waltons Vermont Summerhouse

  • Page 1 For assistance please contact customer care on: 01636 880514 - Concrete 75mm laid on top of 75mm hard-core. - Slabs laid on 50mm of sharp sand. Mercia Garden Products Limited, Sutton On Trent, Whilst all products manufactured are made to the highest standards of Safety and in...
  • Page 2 03VER0808-V1 Please retain product label and instructions for future reference Pre Assembly Overall Dimensions: Length = 2411mm Width = 2484mm Remove the transportation blocks from Height = 2569mm the bottom and top of each panel Base Dimensions: before beginning assembly Length = 2350mm Width = 2360mm Before assembly...
  • Page 3 Please retain product label and instructions for future reference Step 3 Step 5 Secure the barrel bolts to the top & Fix the corners with 50mm bottom of each side door and the screws as shown in the slave door using 6x10mm screws. illustration.
  • Page 4 Please retain product label and instructions for future reference Step 7 Step 9 Place the gable tops onto the window Attach 2x eaves frames to panels, ensuring the boards interlock. the long side of each roof sheet, ensuring the frames Secure in place using 4x50mm screws are ush to the edges, per gable top, screwing in an alternating...
  • Page 5 Please retain product label and instructions for future reference Step 13 Step 11 Attach the fascia’s and nial’s Cut the felt into 3 sheets to the the front and back of the and lay onto the roof. building using 12x40mm screws. *Ensure there is approximately 12x40mm Screws 50mm overhang of felt...
  • Page 6 Please retain product label and instructions for future reference Please retain product label and instructions for future reference Step 15 Attach the two turn buttons to the slave door at the top and bottom using 2x30mm black screws. 2x30mm Black Screws *These turn buttons help to keep your doors straight during high &...

This manual is also suitable for:

03ver0808-v1