88
8
1 3
1 0
1 6
Swivel the CrossJet into position
8
Mount CrossJet with two Allen screws
9
3 mm
tightening torque = 2.5 Nm
Move the extraction tube so that the
10
protective glass tray can be removed
IMPORTANT! When removing and insert-
ing the protective glass tray, make sure
that this is not contaminated, scratched, or
1 5
otherwise damaged.
Remove the protective glass tray from
11
the laser optics
Swivel the air connection back
12
Connect the air hose
13
Re-insert the protective glass tray
14
Screw in the CrossJet extraction tube
15
Position the extraction tube
16
Fasten the extraction tube with two
17
Allen screws
size 3 mm
tightening torque = 2.5 Nm