Advertisement
Quick Links
Advertisement
Related Manuals for SICE Tech WHY EVO
Summary of Contents for SICE Tech WHY EVO
- Page 1 DUPLICATING PROCEDURES VERSION...
- Page 2 An important news has been represented by a default integration, on each button, of a 64 bit Sice Rolling code. This allows to use the WHY EVO remote controls as a first installation in combination with one of our SICE Tech multifrequeuncy receiver.
- Page 3 2. Release both buttons. Now the WHY EVO RED LED emits a short flash every 2 seconds. 3. Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance (as shown in the picture).
- Page 4 2. Release both buttons. Now the WHY EVO RED LED will emit a short flash every 2 seconds. 3. Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-2 cm of distance (as shown in the picture).
- Page 5 5. The WHY EVO RED LED will emit a short flash every 2 seconds. That it informs the user that, to duplicate the remote control, it is necessary to emit the SEED CODE to realize the copy.
- Page 6 5. The WHY EVO RED LED will emit a short flash every 2 seconds. That it informs the user that, to duplicate the remote control, it is necessary to emit the SEED CODE to realize the copy.
- Page 7 2. Release both buttons. Now the RED LED of “NEW WHY EVO” will emit a short flash every 2 seconds. 3. Place the “SOURCE WHY EVO” in front of the “NEW WHY EVO”, at about 1-2 cm of distance (as in the picture 3 at the page 3).
-
Page 8: Special Procedures
2. Release both buttons. Now the RED LED “WHY EVO” will emit a short flash every 2 seconds. 3. Place the original remote control to be programmed in front of the “WHY EVO”, at about 1-3 cm of distance (as shown in the picture at the page 3). -
Page 9: Compatibility List
Close to the automation and before using the TX (NEO) original remote control, press and hold pressed the PRASTEL button on the WHY EVO remote control until the FAAC AVIDSEN LED starts to flash. Wait for the end of the flashing. - Page 10 THE MULTIFREQUENCY REMOTE CONTROL Sice Tech Srl Via Berardo Maggi, 4 - 25124 Brescia (BS) Tel. +39 02 45073682 Fax +39 02 45073683 for orders: sales@sicetech.it www.sicetech.it - www.why-evo.com Operative center: Via Nedo Nadi, 7/A - 43122 Parma (PR)
Need help?
Do you have a question about the WHY EVO and is the answer not in the manual?
Questions and answers