Table of Contents
Advertisement
Names and functions of parts
8
Front face of the main unit
1 Front stand
2 Channel (CH) button CH1 to CH3
• You can switch between the registered channels
(settings related to input signal) with a single push.
3 CDL button
• Switches to CDL mode.
4 Function (F) button F1 to F8
• Registered functions are executed with a single push.
5 MENU button, jog dial, RESET button
• Changes the OSD menu settings.
About the power indicator
Displays the status of the main unit. The power indicator will flash during firmware updates or when an error is
detected even if it is set to [Off].
Off: when power supply is not connected
Green lit: when a power supply is connected and the video display's power is on
Green flash: during calibration or firmware update
Amber lit: during standby (power supply is connected and the power to the video display is off)
Amber flash: when error is detected
1
2
3
4
5
6
7
(Power) button
6
• Turns the power on and off.
7 Power indicator
8 USB port
• For connecting USB memories, HUBs, color grading
controllers (Tangent Wave's Element-Tk), or wireless
LAN devices (Wi-Fi adapters).
9 Headphone terminal
1
8 9
Advertisement
Table of Contents
