Table of Contents
Advertisement
Use a commercially-available belt or strap to fasten it to a wall or other surface
1 Pass a strong, commercially-available belt or strap through both carrying handles on the rear side.
2 Fasten the tips of the belt or strap to a floor or wall.
Mounting the Main Unit on a Stand or Wall
This main unit can be fitted to a stand* or to a wall mount bracket*. Remove the stands beforehand (
* Commercially available.
CAUTION
• For safety, make sure to perform this step with at least two people.
• Make sure that the main unit does not fall during installation/removal.
• Avoid touching the screen during this step as it may damage it.
• When mounting the main unit on a wall, make sure the wall has sufficient strength. If necessary, apply reinforcement. Also, make
sure to check the load capacity of the stand or wall mount bracket.
• When the video display is placed on a rack or display stand and ventilation around it is blocked by equipment placed above or
below or in a surrounding area, the operating temperature may increase, causing a failure or overheating. In order to maintain the
operating temperature condition of the video display (5 ˚C to 35 ˚C), make space of at least 1U (4.4 cm) above and below and at
least 4 cm (1.6 in.) space from its back. Make sufficient space from peripheral equipment, secure vents, or install a ventilation fan.
• When installing the video display on a wall, make sufficient space from the wall so that cables are not squeezed or twisted.
1 Attach a commercially available stand or wall mount bracket using the screw holes on the back or side
face of the main unit.
Commercially-available belt or strap
4-M6
Depth 8 (Max.)
Rear
Setting Up
11
12).
Unit: mm
Advertisement
Table of Contents
