Instantel Micromate Instruction Sheet
  1. Manuals
  2. Brands
  3. Instantel Manuals
  4. Microphone
  5. Micromate
  6. Instruction sheet

Instantel Micromate Instruction Sheet

Linear microphone
Hide thumbs Also See for Micromate:
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual
Instruction Sheet
The Micromate's Linear Microphone automates the monitoring
of air overpressure and vibration monitoring in the same
unit, making it a cost effective and flexible device for these
applications.
The Linear Microphone is calibrated to the ISEE-2017 standard
with a frequency measuring range from 2 to 250 Hertz and an
amplitude range up to 500 Pascals (0.0725 psi, or 148 dB).

Range of Applications

• Blasting
• Demolitions
• Quarries

Tools and Materials Required

• Micromate ISEE Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(P/N: 721A2501) or
• Micromate DIN Base Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(P/N: 721A2601) or
• Micromate Swedish Blasting Base Unit . . . . . . . . . . . . . . . . . . .(P/N: 721A3601) or
• Micromate Swedish Pile Driving Base Unit . . . . . . . . . . . . . . . .(P/N: 721A3801)
• Linear Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (P/N: 721A0201)
(stand and windscreen included)
• Microphone Stand Extension Rod (28 cm/11 in) . . . . . . . . . . . . . . .(P/N:400-720020-000)
• Extension cables, as required:
10 m (33 ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (P/N: 721A0803)
30 m (100 ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(P/N: 721A0801)
75 m (250 ft) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(P/N: 721A0802)
Custom Extension Cable Kit. . . . . . . . . . . . . . . . . . . . . . . . . . (P/N: 721A3201)
• THOR software (free version included with any Micromate purchase) or
• THOR Advanced software (Additional license purchase required). . .(P/N: 72300201)
Physical Installation
(for a detailed description see page 3.)
1. If required, assemble the 3-piece microphone stand (see Figure 1. on page 3).
2. Point the microphone in the direction of the pressure source.
- If required, place the windscreen on the end of the microphone.
3. Connect the microphone to the Micromate by aligning the red end of the connector with the indicated
red microphone port.
4. Make sure the Micromate has the proper Setup File (see THOR Software Setup below) and then perform a
sensor check by pressing the Sensor Check key on the keypad.
The World's Most Trusted Monitors — Vibration · Noise · Air Overpressure

Linear Microphone

• Construction
• Dynamic Compaction
• Tunnels and Subways
www.instantel.com
www.instantel.com
Instantel
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Micromate and is the answer not in the manual?

Questions and answers

Related Manuals for Instantel Micromate

Summary of Contents for Instantel Micromate

  • Page 1 Tools and Materials Required • Micromate ISEE Base Unit ......(P/N: 721A2501) or •...
  • Page 2 9. Select the Checkmark and then Save to Current File/Overwrite File. Calibration Note : The Linear Microphone must be sent to a manufacturer certified calibration facility, or Instantel headquarters for calibration. Please visit our calibration facility locator at www.instantel.com. Instantel recommends calibrating all air overpressure microphones once a year and provides the Next Calibration date on the unit and sensors.
  • Page 3 4. Install the Linear Microphone in the clip at the top of the microphone stand and point the microphone in the direction of the noise source. 5. Ensure that the microphone cable is securely attached to the Micromate. 6. Press the Sensor Check key on the Micromate ensuring the microphone is properly attached and has passed the Sensor Check. Section...
  • Page 4 To protect your warranty, you must complete and return a Warranty Registration Certificate, or complete the online Warranty Registration Form, within ten days of purchase. Products will be assumed out of warranty if there is no warranty card on file at Instantel. Retain this portion and the proof of purchase for your records.

Table of Contents