Power Mode Switch; Work Light Switch - Hitachi ZAXIS 135US-5B Operator's Manual

Power Mode Switch

Two engine speed modes, ECO and PWR modes are selected
by operating the power mode switch.
 ECO (Economy) Mode
Operate the machine in this mode when performing normal
work.
ECO is displayed on Power Mode Display (1).
 PWR (Power) Mode
Use PWR (Power) mode when extra horsepower is needed.
PWR is displayed on Power Mode Display (2).
f
NOTE: ECO mode is set automatically when starting the
engine. Set PWR mode if necessary.

Work Light Switch

Work light switch has the following positions.
1 Position : Work light (1) on the base machine will light.
Also, the switch panel illumination will light.
2 Position : Work light (2) mounted on the boom and
work light (1) on the right side of the machine
will light. At the same time, the switch panel
illumination will light. The monitor changes to
night mode.
OFF : Work lights (1), (2), and the switch panel
illumination will turn off.
f
NOTE: When the key switch is turned OFF while the work
light switch is in 2-position, the light turns ON for 30 seconds.
OPERATOR'S STATION
1-91
1
2
2
1
MDAA-01-274
MDAA-01-001EN
MDAA-01-353
MDCD-01-029
M157-01-146