Ilife V3s Pro User Manual page 4

Important Tips
How to use
• Before using the robot, please ensure the power switch is on.
Take a few moments to survey the area to be cleaned and
remove any obstacles.
• The robot will pass over the same area of the floor multiple
times to ensure thoroughly clean.
• The spinning brushes may flick small granule(dog food, cat litter) - - - - - -
here and there, but finally the robot will vacuum them all in.
• Before replacing side brushes, check and match "L" "R" mark on both side brush and
bottom of robot.
• When you set the clock time or schedule, the final operation will be confirmed by beep
from robot. If no tone received, your setting is unsuccessful.
• Empty the dust bin. You could notice the robot vacuum less, even spits out. when the
dust bin is full, though there is no any warning beep sound.
For Best Performance
• Empty V3s Pro's dust bin and clean its filter after every use.
• Filter could not be washed by water.
• Replace new Filter when you notice V3s Pro vacuum gets weaker and pick up less
than before.
• Put charging home base against the wall and remove obstacles about 1 meter at two
sides and about 2 meters forward.
• Fully charge robot's battery before each cleaning cycle.
Battery Life
To extend V3s Pro's battery life and keep its cleaning at peak performance:
• Charge the robot overnight before first time use.
• If the robot is not used for a long time, please turn off the power switch.
• Recharge the robot as soon as possible. Waiting several days to recharge may damage
the battery.
• Use the robot frequently.
Warning: T he product contains electronic parts. DO NOT submerge V3s Pro
or spray it with water, clean with a dry cloth only.
� �
oN;
OFF
�