Zmorph FAB Manual Manual page 109

109
CNC milling workflow
CNC Worktable explained
The CNC workable has been designed for easy and intuitional material fixturing. Along with the CNC table
were designed clamps adapted to the table. Table with dimensions of 259mm x 250mm has M4 168 threaded
mounting holes with a spacing of 15mm for materials not covering the entire surface of the table and 8
threaded holes with a spacing of 30mm located on the edges corner enabling fastening of materials taking
up the entire working area.
M4 threaded slots with 30mm spacing
M4 threaded slots with 15mm spacing
Product Manual - ZMORPH FAB back to table of content >>