Table of Contents
Advertisement
Available languages
Available languages
4 Connecting a 48V Battery
When using a battery, make sure the power switch is off before connection.
1. First connect the external battery cable to the battery.
2. Connect the external battery cable with the power cables from the out-
board.
Avoid battery short-circuit during connection.
Do not short-circuit the main switch with other power supplies. The main
switch should be mounted on the boat, and the back plate of the main
switch should not be removed.
Outboard motor will stop working once the power cable disconnects.
Counterclockwisely turn the reset button on the power switch until it is
stuck to power on the battery before use.
Users can also enlarge the battery capacity by connecting multiple bat-
teries in parallel.
During use, if a poor contact is found, it is recommended to check the
tightening of each terminal connection.
2
Main
Switch
Figure 4-1
18
1
+
-
48V
- Quick Links:
- Battery
- Error Codes and Solutions
- Battery Charging
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the SPIRIT 1.0 Plus and is the answer not in the manual?
Questions and answers
Should the 1.0 spirit battery stay connected to the charger continually when not in use?
The provided context does not explicitly state whether the ePropulsion SPIRIT 1.0 Plus battery should remain connected to the charger when not in use. However, it does mention that only the official ePropulsion charger should be used and warns against charging other batteries with it. To ensure battery safety and longevity, it is generally recommended to follow the manufacturer's guidelines regarding charging and storage.
This answer is automatically generated