Samsung AE040RXEDEG Service Manual page 35

Disassembly and Reassembly
No Parts
6 ASS'Y CONTROL
OUT
7 FAN PROPELLER
+ MOTOR
38
Procedure
1) Disconnect and Separate 5 Connectors of
wire from Assy Control Out.
2) Separate Comp wire and Reactor wire
from each object.
(When you disconnect BLDC motor
connector you have to cut the power off
first and disconnect 30 seconds later And
Make sure that is impossible to connect
and disconnect BLDC motor connector
when the power is on)
3) Unscrew and remove 2 screws on of Assy
Control out.
1) Take Fan Propeller apart.
2) Unscrew and remove 4 screws on Motor to
take apart Motor.
(Use + Screw Driver)
Remark
Samsung Electronics