Seville Classics UltraHD UltraGuard WEB346 Assembly Instructions Manual page 6

UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
Front
Back
Front
TIP: A magnetic screwdriver is included for your
convenience. If a power screwdriver is used, keep on a low
Back
torque setting.
Front
5
Step 1: Install Right Panel (#2) to the Top Panel (#3)
Place the Right Panel (#2) on the ground vertically.
Make sure the front of the panel faces downward.
Place the Top Panel (#3) next to the Right Panel (#2).
Line up the screw holes, use 3 pcs of Screw F (#41)
to tighten.
Note: Assemble on top of cardboard to reduce chance
of scratches or damage during assembly.
Step 2:
Install Left Panel (#1)
Place the Top Panel (#3) and Left Panel (#1)
vertically. Line up the screw holes, use 3 pcs of
Screw F (#41) to tighten.
Step 3: Install Bottom Panel (#4).
Attach the Bottom Panel (#4) to the Left and Right
Side Panels (#1 and #2). Make sure the front of the
panel faces downward. Use 6 pcs Screws G (#42) to
assemble the panels.