Seville Classics UltraHD UltraGuard WEB346 Assembly Instructions Manual page 10

UltraHD® Cabinet Stacker (Model No. WEB346, WEB640)
*NOTE: We recommend using TWO people to assemble the cabinet*
Step 12: Install Mounting Strap (#60)
A. Remove 1 pc Screw F (#41) from the back
corner protection.
B. Attach the Mounting Strap (#60) to the
back Corner Protection brackets as the left
photo shows using Screw O (#61) and
Washer (#27).
C. Drill a hole in the wall with a 5/16" drill
bit, insert the Wall Anchor (#55-A) into the
hole.
D. Attach the other end of the Mounting
Strap (#60) to the wall using Screw M (#55)
and Washer (#27-B).
Repeat steps A through D to install the
other mounting strap.
Warning: To prevent possible tipping, it is suggested
that the Mounting Straps be installed. For safety,
secure the mounting straps to wood studs whenever
possible.
9