Connecting The Exhaust Ducting; Setting Up Recirculation Mode - Miele DA 3466 Operating And Installation Instructions

Connecting the exhaust
ducting
 Attach the exhaust ducting, e.g.,
flexible hose, to the exhaust socket
using a hose clip (available as an
optional accessory).

Setting up recirculation mode

If site conditions are not suitable for the
ventilation hood to be used with vented
extraction, it must be set up for
recirculation. A conversion kit, available
from a specialist dealer or from
Customer Service, is required for
operating the ventilation hood in
recirculation mode. You will also need a
charcoal filter (see "Technical data").
Conversion kit DUU 150 with a plastic
grille is suitable for installing in a
concealed area at the top of the
cabinet.
Conversion kit DUU 151 with a stainless
steel grille is recommended if the grille
is to be installed in a visible area.
Installation
39